Can the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout be Used With Swing Away Tongue

Question

Question:

Will this work on my boat trailer with a swing-away tongue?

asked by: SOLER

0

Expert Reply:

The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout # DX56FR is designed to mount on a 3" x 5" straight tongue. In order to make this work for your trailer, you would need to use a flexible brake line since the actuator and line will be folding away.

I have attached a video review as well as a link to all of our brake lines for your reference.

expert reply by: Robin H

0

Answer 1

Hey there Lorna. Yes, the Demco Drum Brake Actuator #DM28CV or Demco Brake Actuator Disc #DM33CV will 100% fit your 3" wide 4" tall trailer tongue. Even though the actuator says 3" wide and 2-1/2" tall, it will work because it…

view full answer...

Answer 2

Your surge coupler will have either a sticker or an engraving on it, typically near where the coupler is located. If you can get me that information and what you're needing to replace on it I'd be more than happy to help you find what…

view full answer...

Answer 3

That's a really good question, and there is a difference between the 7,500 lb Dexter DX7.5L A-60 actuators for disc brakes; the differences are both in what they fit, as well as their length. - 14" Long & Top-Mounted For 3" Wide…

view full answer...

Answer 4

Hey Jerry, thanks for reaching out. I can help point you in the right direction, but the VIN doesn't do much good in this case because there isn't a universal database for trailers like there is for motor vehicles. Boat trailer manufacturers…

view full answer...

Answer 5

The Dexter DX7.5L A-60 Actuator #DX56FR you have is designed to be mounted on the end of the trailer frame as seen in the image below. Based on how your actuator was mounted the Actuator #DX89FR would best install like your current actuator. If you…

view full answer...

Answer 6

That is an extremely good question, Jim. The DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs #DE66YR is indeed two of the #DE89YR put together to make ordering for one axle easier. That said, I have no idea why we…

view full answer...

Answer 7

Hey Clay, if the bolt pattern of your boat trailer does not match what is on the Demco actuator part #DM8104311 you have the option to redrill holes on the trailer to match the actuator or you can have the actuator welded to the trailer. I'd…

view full answer...

Answer 8

Hey Carol! If it’s sitting on the edge of the ball it likely isn’t fully seated. Make sure you’re lowering it completely onto a 2" hitch ball with the jack. Once it’s down, try raising the jack to lift the rear of the vehicle slightly. If it’s…

view full answer...

Can the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout be Used With Swing Away Tongue

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching