Will the Curt E16 5TH Wheel Hitch Fit On RBW Rails That held a Little Rocker Hitch?

Published 11/04/2021

Products Featured in This Question

Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs

(617)

$387.12

Curt Lube Plate for 5th Wheel Trailer Hitches - 10" Diameter

(501)

$11.85

Question:

Does the Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs have the same leg spacing going into rails as does a RBW Little Rockler 16,000 hitch? Already have rails installed and need to replace the hitch but it needs to fit into the existing rails.

asked by: David B

Expert Reply:

Yes, the Curt E16 5th Wheel Trailer Hitch # C16115 will fit in place on your RBW 5th wheel rails that you have on your truck. You can verify the fit on your rails with the following measurements as well. The front to rear mounting rails will be 22" apart at the center of the mounting points. The Curt hitch will fit into the mounting holes that are 20-1/2" apart on center driver side to passenger side.

Be sure to use a Curt 10" Fifth Wheel Trailer Hitch Lube Plate # 16721 on your pin box to eliminate the need for grease on the plate surface as well as extend the life of the hitch.

expert reply by: Bud M