BAKFlip F1 Hard Tonneau Cover for 2022 GMC Sierra 3500

Question

Question:

I have a 2022 GMC Sierra 3500 and I am looking for a fold up bed cover.

asked by: Bernard

0

Expert Reply:

I have a perfect fold up bed cover for you that will go great with your new 2022 GMC Sierra 3500. It is the BAKFlip F1 Hard Tonneau Cover item # BAK37FR. This is a custom fit aluminum and fiberglass quad-fold cover that sits inside your GMC Sierra 3500's bed rails. The textured, black powder coat provides durability. It has an easy, no-drill installation with frame rails that clamp to the inside of your truck bed side rails. The included bolts secure the front hinge to the frame rails. I have attached a review video.

expert reply by: Jerred H

0

Answer 1

Hi Duane, Air Springs are better for leveling loads and will typically give you a rougher unloaded ride quality so these might not be the best option for your setup depending on what your intended use is. Air springs are the best option when it comes…

view full answer...

Answer 2

Hey Jeffery yes that's true. SumoSprings are going to give you a better ride because SumoSprings are progressive springs, so their initial engagement is lighter than the Timbrens. There are a bunch of different ones for your GMC, but I'd…

view full answer...

Answer 3

In regards to the SumoSprings Rebel Custom Helper Springs for a 2022 GMC Sierra 3500; part #SSR-203-40-2 for 3,000 lbs or part #SSR-203-47-2 for 5,000 lbs, I don't recommend just going with the highest rated option as it's best to be in the…

view full answer...

Answer 4

Hi Jim, The BAKFlip F1 Hard Tonneau Cover #BAK37FR is a confirmed fit for a 2024 GMC Sierra 3500 with an 8' bed and is a quad-fold (4-panel) cover.

view full answer...

Answer 5

The BAKFlip F1 Hard Tonneau Cover #BAK37FR will stick out into the bed approximately 23" when folded to just the first of the four panels. I wasn't able to get an exact dimension for the thickness but was told the panels are about 3/4"…

view full answer...

Answer 6

On the Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lbs, #CT-3001-Z, you referenced the distance between the mounting holes is 3-1/16 inches center to center. It is the same separation for each set. Each hole…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

BAKFlip F1 Hard Tonneau Cover for 2022 GMC Sierra 3500

Featured Help Information

Miscellaneous Media

Continue Researching