Which Pace Edwards Contractor Ladder Rack Fits 2012 Ram 2500 Long Bed Crew Cab

Question

Question:

will ladder rack fit 2012 ram long bed, with 4 door cab?

asked by: Rick D

1

Helpful Expert Reply:

For your 2012 Ram 2500 long bed with the crew cab the correct Pace Edwards Contractor ladder rack would be the part # 311-CR6008.

expert reply by: Jameson C

1

Answer 1

Hey Jason, I checked with Pace and the correct Pace Edwards Contractor Rig Ladder Rack that fits your 2021 Ram 2500 long bed is the part #311-CR4008.

view full answer...

Answer 2

Hello Dan, thanks for reaching out. We do have an option for a tonneau cover/lumber rack combination for the 2024 Ram 3500 with the 8' bed. Take a look at the Pace Edwards JackRabbit Retractable Tonneau Cover w Contractor Rig Rack - Aluminum and…

view full answer...

Answer 3

That is a great question! The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack will work with a Pace Edwards tonneau cover as long as it has the Explorer Series Rails. If you have an 8' bed you can use the Full-Metal JackRabbit #311-FED7936…

view full answer...

Answer 4

Hey Jason, yes the Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack #311-CR6008 does fit your 2021 Ram 2500 long bed. To order this rack with a retractable tonneau cover you'd want the Pace Edwards part #JED7936-CR6008 instead.

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hey Patrick, thanks for the measurement. The Travel Door Latch for GE Appliances RV Refrigerator item #GE98FR has mounting holes 1-3/16" on center. It's designed for the 9.8 Cu. Ft. GE Appliances RV Refrigerator with Top Freezer item #GE58FR…

view full answer...

Answer 11

Hey Bill! The Rebel is the heavier duty SumoSprings jounce springs and they have the higher weight rating at 3,000 lbs #SS64VR or 5,000 lbs #SS27GR. I usually only recommend these heavy duty versions if you have a lot of weight in the truck bed or on…

view full answer...

Answer 12

Hey Tim, the Brandmotion FullVUE Digital Rear View Mirror with HD Backup Camera #BM86YR that you referenced does come with a camera in the third brake light/CHMSL location that you asked about. I attached a picture that shows the contents of the kit…

view full answer...

Which Pace Edwards Contractor Ladder Rack Fits 2012 Ram 2500 Long Bed Crew Cab

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching