How Wide of a Trailer Will the Malone TopTier Load Bar Kit for Utility Trailers Work On

Question

Question:

Can these racks be used in a 7’ wide utility trailer?

asked by: Blaise B

0

Expert Reply:

I checked with Malone and they list the Malone TopTier Load Bar Kit for Utility Trailers part # MPG493 as a fit for trailers with decks up to 5' wide. We don't offer any ladder racks for open trailers with a wider deck at this time. We do however offer side ladder racks like the Pack'em Ladder Rack for Side Rail of Utility Trailer part # PK-28WL2-BMH.

expert reply by: Conner L

0

Answer 1

I did contact Malone on your behalf and they confirmed you could use the Malone TopTier Load Bar Kit for Utility Trailers #MPG493 for a 5-1/2" foot trailer application. That said, they did have a specific note of caution that they stand behind…

view full answer...

Answer 2

The Malone TopTier Load Bar Kit for Utility Trailers part #MPG493 fits 4' wide and 5' wide trailer decks so it would not be compatible with your 6 foot wide utility trailer. The Malone Crossbar Conversion Kit for Standard Utility Trailer part…

view full answer...

Answer 3

Yes you can swap out the angled U-bolts for square U-bolt to better match your trailer on the Malone TopTier Load Bar Kit for Utility Trailers part #MPG493. These are 3/8" U-bolts that you will have to provide yourself as we do not offer an…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Good morning to you as well Steve, and congrats on your new van! I would be more than happy to make a recommendation for you! The best hitch for your 2026 Toyota Sienna, is going to be our etrailer item #e56RR. This is a class III hitch with a…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Ben! The Curt does have that restriction on the vertical bike racks so I recommend the TowSmart Trailer Hitch #TS82VR. This has a higher tongue weight capacity and will allow you to carry the VelociRAX. It would be a good idea to add the etrailer…

view full answer...

Answer 9

Hey Neal! You can use the standard 5/8" Hitch Pin and Clip #e47RV for quicker installation and removal, or the Locking Hitch Pin #e98882 if you want to keep the carrier secured to the vehicle. Either way, you will lose the built-in anti-rattle…

view full answer...

Answer 10

Hey Doyle, welcome back! The push-button mechanism on the Benton MoveHitch Cargo Carrier #B86VR and #B38VR (with cargo net) is very reliable and has been thoroughly tested. It is actually one of the best features of the MoveHitch since it makes it…

view full answer...

Answer 11

Hi! The usable space on the Benton MoveHitch Cargo Carrier, Part #B38VR, measures 24 inches deep by 60 inches wide with 3 inch tall side rails. That gives you a nice, roomy platform for things like coolers, generators, camping gear, totes, or other…

view full answer...

How Wide of a Trailer Will the Malone TopTier Load Bar Kit for Utility Trailers Work On

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching