How to Install: Curt Trailer Hitch Receiver on your 2022 Toyota Sienna Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hi Paul; the kick sensor will still work after installing the etrailer Hitch #e56RR. It probably won't be the same motion has before so you will have to find the sweet spot with your foot to get it to work. This hitch fits the 2021 - 2024 Toyota…

As far as the Curt hitch #C22UR and the Draw-Tite #DT55MR, we unfortunately haven't had a chance to install the hitches yet. With that being said, we do not have the precise ground measurements when fitted onto a 2021 Toyota Sienna. However, both…

Between the etrailer #e56RR and Draw-Tite #DT55MR for your 2024 Sienna I would choose the etrailer hitch. The only major differences between the two hitches are the capacity and the powder coat finish. It is true that the Draw-Tite has a higher…

The best hitch for a 2024 Toyota Sienna is the Curt item #C22UR. This hitch is custom fit and bolts to your Toyota with included hardware. It is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity and a 350 lbs maximum…

Hi Jordan, Ok, I think I can clear this up for you, and just to get the final answer for you, the maximum COMBINED weight a cargo carrier and its luggage can weigh in your current setup is 175 lbs (also, apologies for the caps but they don't…

The short answer to this is, no, adding this hitch will not safely increase your tongue weight capacity. Since the tongue capacity for the vehicle is 350-lbs, upgrading to a hitch like the Draw-Tite Max Frame #DT78MR won't allow you to carry more…

The Curt Class III trailer hitch for your Pathfinder, part #C13126 would utilize nuts that are welded up into the frame member. The conical toothed washers used in the installation do a good job of maintaining the torque applied to the bolt during…

Using anti-seize compound on the hitch mounting bolts is not necessary. Because of the lubricant properties, you'd need to lower the torque specs in order to not over tighten the bolts. You would be better off installing the bolts dry and…

Assuming that the hitch was properly installed, what you are experiencing is most likely your drawbar moving around in the receiver. This is a fairly common occurrence, the drawbar is meant to fit fairly snug into the receiver, but differences in…

The Curt Trailer Hitch Receiver part #C22UR will work on a 2021 Toyota Sienna with hands free liftgate feature. They will not block the sensors completely but the hitch does slightly interfere. Basically, you most likely just need to place your foot…

Hey Daniel thanks for all the questions! One of them is going to be pretty easy but also disappointing, every hitch for your 2019 Toyota Sienna is going to require the panel to be removed, trimmed, then reinstalled. This is actually not as hard to do…