What's the Rating of the 12V Accessory Circuit on a 7-way Trailer Connector

Question

Question:

Does the 12 volt 7 pin trailer power source on a GM 2011 Savana van have an amperage or power limiter or just direct battery.

asked by: C C

0

Expert Reply:

Assuming that the 7-way connector on your Savana van is factory installed, the 12-V circuit to the trailer runs through the power distribution panel in the engine compartment, where it's protected by a 30 or 40A fuse. (The owner's manual doesn't specify the fuse rating).

The amount of power that the circuit can deliver will be limited by the alternator output, the relatively small gauge wire used in the circuit and the distance away from the battery/alternator.

If you have a trailer mounted accessory, and you're concerned that the 12V feed to the trailer connector won't provide adequate power, I'd recommend installing a battery on your trailer. While you're under way, the 12V feed can provide a maintenance charge, and when shore power is available, you can use a quality battery charger like part # 329-GENIUS10 to fully charge the battery.

expert reply by: Mike L

0

Answer 1

Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 3

Hello Branson, We are currently working on improving our fit guide for RVs, and it looks like you’re searching for bearings. I’d be more than happy to help with that. We do not have a database that tells us exactly what components are installed on…

view full answer...

Answer 4

Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?

view full answer...

Answer 5

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 6

Good news! I can help you wire your 12 volt fuel pump to work with your 7 way vehicle plug. To accomplish this task you will need a few things: 7-way plug #A7WCB 10 gauge wire #10-2-1 2 pole flat wiring #HM47965 butt connectors #DW05745-5 First thing…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

What's the Rating of the 12V Accessory Circuit on a 7-way Trailer Connector

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching