What Parts Do I Need To Replace The Brake Assembly and Bearings On A 3500 Lb Lippert Axle

Published 10/19/2021

Products Featured in This Question

etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs

(737)

$125.44

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased

(1835)

$105.75

Mounting Hardware for 10" Brake Assemblies

(425)

$19.86

Question:

What part number to use for this lippert axle LCI35-SB-86.5-68.5-N0SP-0S-L-545-7242-18PT Ser#057-000144029 Need bearing sets/ brake drums/ brake assembly part suggestions. Thanks

asked by: Jeff

Expert Reply:

Your 2017 Keystone Raptor 5W Toy Hauler will need the following parts to replace the trailer brakes on this axle. First, you need the brakes. The brakes that are compatible with your axle are the Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs, part # AKEBRK-35. This has the left and right hand assemblies.

Next you will need the Mounting Hardware for 10" Brake Assemblies, part # BRKH10B. This comes with everything you need to install the brake assemblies. Lastly, you will need the etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2, part # AKHD-545-35-EZ-K. These is the replacement hub and drum for your axle. The bearings are also included in this kit.

I have included product description links, a video installation link and some video links describing the parts I recommended below.

expert reply by: Mark Smith