Replacement Electric Brakes For A Dexter 4,400 Pound Axle
Updated 09/26/2022 | Published 09/24/2022
Products Featured in This Question
Question:
. Which is a direct replacement for dexter 4400lb Sn 134180848?
asked by: Jeff C
Expert Reply:
We have just the perfect electric trailer brakes for your Dexter Axle!
The Dexter Electric Trailer Brake Kit # K23-462-463-00 comes with one left and one right brake that measure out to have a 10 inch diameter by 2-1/4 inch wide. The mounting flanges have a 4-bolt pattern, and will 14 inch to 15 inch wheels.
When measuring the bolt pattern the measurement from center of top mounting stud to center of top mounting stud is 2-7/8 inches. The measurement from the center of bottom mounting stud to center of bottom mounting stud is 3-1/4 inches. The measurement from the center of the top mounting stud to the center of the bottom mounting stud is 3 inches.
I attached a review video link below.
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 5200 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4,400 lbs
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: TruRyde Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: What Parts Do I Need To Replace The Brake Assembly and Bearings On A 3500 Lb Lippert Axle
- Video: Let’s Check Out the Dexter Electric Trailer Brake Assembly
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Feature Breakdown: TruRyde Electric Trailer Brakes
- Video: etrailer Electric Trailer Brakes Review
- Video: Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Should I Get a Proportional or Time-Delayed Brake Controller
- Shop: Brake Controller
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Video: How to Choose a Trailer Brake Controller
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer wiring
- Search Results: trailer jack
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Axles
