How to Determine Correct Replacement Trailer Hub

Updated 10/11/2021 | Published 10/10/2021

Question:

I have an older Moody boat trailer. It has a straight 1.25” axle spindle. Which hubs will work for me? I’m looking for pre greased and ready to go

asked by: Will

Expert Reply:

I can help you determine the correct replacement hubs, though there are a few things you'll need to know in order to get the right one. First, you need to know the weight rating of your axle, and also what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them.

If you are unable to find them, you need to use a digital caliper and measure your spindle to the thousandths of an inch where the bearings and grease seal ride. You can use the photo I've attached to see exactly where you need to measure. Additionally, you need to know your hub's wheel bolt pattern; if you do not know what it is I have added a help article which details how you can find it, as well as a printable bolt hole template you can use.

For example, the Easy Grease Trailer Idler Hub - Pre-Greased # AKIHUB-545-2-LFEZ-2K is for 2,000 lb axles, uses inner and outer bearing L44649 (1.063" inner diameter), and a grease seal with a 1.50" inner diameter.

If you get back to me with this information I'd be happy to try and help you find the correct hub; I have also added a link below to our entire selection of hubs for you to come back to.

expert reply by: Kyle S