Replacement Clips For Removable Bug Screen on MaxxFan Roof Vent

Question

Question:

I have a MaxxVent Roof Fan in my RV, when removing the inside round screen to clean it, the 4 clips that hold the screen in place 3 are broken off. I need the fan clips can you help

asked by: Debra B

0

Expert Reply:

For your MaxxFan Deluxe Roof Vent, # MA00-07000K, you need the Maxx Air Screen Retainer Finger, # MA44RR. These are sold individually and fits all roof vent models.

expert reply by: Michael R

0

Maxxfan Screen Retainer Fingers_clips
(click to enlarge)

Removable Bug Screen
(click to enlarge)

0000001
(click to enlarge)

Answer 1

Hey Debra, thanks for reaching out! The Replacement Hardware Kit #MA94GR doesn't have the option to be broken down into more individual pieces, but you might be able to find just a clip that will be sufficient at your local hardware store.

view full answer...

Answer 2

The correct replacement retainer clips that you are looking for are the retainer fingers part #MA44RR. This is the only replacement design that is currently offered.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Replacement Clips For Removable Bug Screen on MaxxFan Roof Vent

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching