Video Transcript for Review of Lippert Components Replacement Storage Bin - LC131633

Jeff: Hello everybody. This is Jeff at etrailer.com. Today we're going to take a look at this replacement storage bin for the Lippert under chassis double bin storage units. This will replace one of the storage bins on your Lippert under chassis double bin storage unit. Those units we do sell separately on our website. They're part number LC125460 or LC175180.Basically those are storage units that are designed to mount beneath your trailer or your RV chassis, and then these bins, there's one on each side.

They slide out on either side and are easily accessible. They do come all the way out. They're detachable for use in your garage shed or at a campsite. They are a durable plastic construction. The lids on them you can see are hinged to the bins and it has a nice finger hole here to let you easily open the lids.

You can see on the inside has a nice ribbed bottom.When this does slide into the storage units, these holes in the side, you can see right here and right here, there's actually spring-loaded steel pins on the storage unit that'll latch these bins to the unit's frame. When you do slide it in, you can see these will ride on the rails right here, slides into the storage unit, and then those pins will lock it in there to keep it from sliding out.Few specs on this I want to give you is the length one end to the other is right at 27 and seven eighths inches long. The width on it, if you turn it this way, we do the width is right at 19 inches wide. The overall height is going to be right at eight inches tall and it is stamped on the top right here, max load 100 pounds, so you'll only want to put up to 100 pounds in it. It is a durable plastic.

You can see the ribbed bottom there, but that should do it for the review on the replacement storage bin for the Lippert under chassis double bin storage units.