1985 Hale Horse Trailer Brakes 12 x 2, 4-hole

Question

Question:

Please confirm I need parts 23-105 -106-09. 1985 Hale Horse Trailer Brakes 12 x 2, 4-hole

asked by: Clifford M

1

Helpful Expert Reply:

Based on the picture you provided it does look like your 1985 Hale Horse Trailer uses the AL-KO 4-bolt pattern and would require you to use the Dexter Electric Brake Kit # 23-105-106-09. This kit is designed for 6000lb axles and measures 12" x 2" to match your brakes.

You can confirm the fitment of these brakes by measuring the bolt pattern of your current brakes. The bolt pattern of these brakes is shown in the included diagram.

I included a video of the # 23-105-106-09 for you to take a look at.

expert reply by: Samuel C

1

Dexter # 23-105-106-09 Mount Flange 4-Bolt Pattern
(click to enlarge)

Customer Picture
(click to enlarge)

Answer 1

Hey Cory, thanks for all of the information! I believe what you're needing are the Dexter Electric Trailer Brakes #23-105-106-09 and the Easy Grease Trailer Hub and Drum Assembly #AKHD-865-7-2-EZ-K. The brakes have a 4-bolt mounting pattern that…

view full answer...

Answer 2

That is a neat looking camper. 1989 was a good year. Honestly, the same answer will apply to the brakes on your 1989 Silver Streak Travel Trailer. The 12" x 2" brakes are still standard. We will just need to make sure that the brake…

view full answer...

Answer 3

The hole spacing of the Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange - 12" - Left/Right Hand Assemblies - 6K #23-105-106-09 is 3-1/8" between the top two holes, 3-3/8" between the top and bottom holes, and 2-1/2" between…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 6

The etrailer.com Electric Trailer Brake Kit #AKEBRK-7-SA and the Dexter Nev-R-Adjust Electric Brake Kit # 23-464-465 referenced in your question are both self-adjusting assemblies that will work to replace the existing Dexter brakes on your 7,000…

view full answer...

Answer 7

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

1985 Hale Horse Trailer Brakes 12 x 2, 4-hole

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching