Fastway e2 Weight Distribution System Upgrade To 1,200 lbs Tongue Weight

Question

Question:

If I upgrade to the 1200 lb trunnion bars is it likely the hitch will need to be readjusted for my TT?

asked by: Daniel S

0

Expert Reply:

Yes, you can upgrade your Fastway e2 WD hitch with the 1,200lbs trunnion bars # FA92-01-1299.However, sturdier bars could mean that may not have as many adjustments to make.

expert reply by: Bryce D

0

Answer 1

Since you are upgrading to a tongue weight of what could be 1,200 lbs, you will definitely need to upgrade from the 1,000 lb Equal-i-zer Weight Distribution System #EQ37100ET. The reason being that with a set up rated lower than your tongue weight,…

view full answer...

Answer 2

You can use both the RoadActive Suspension Enhancement Kit #RAS4611 and the Timbren Suspension Enhancement Kit #TGMRCK25D at the same time. The Roadmaster kit will take care of the travel the initial travel of your suspension, the Timbren will just…

view full answer...

Answer 3

There are shanks for your Fastway e2 weight distribution hitch that will fit your Ram's 2-1/2 inch hitch receiver, and what you can do is use one from Equal-i-zer, who manufactures the Fastway weight distribution systems. There are a number you…

view full answer...

Answer 4

Hi Claude; without any identifying information the best thing you can do is measure and compare. I was able to find a few pictures on the KZ site and it looks like the Global Link Locking Baggage Lock #GL34FR you were looking at might be the right…

view full answer...

Answer 5

We don't carry the Andersen No Sway Hitch but we have heard more than a few times that it doesn't do well on higher tongue weights like what you have. The best option would be the Reese Strait Line part #RP66084 that you referenced as it has…

view full answer...

Answer 6

Hello Todd, I am sorry to hear that you are having issues with your slam latch. We do not have any replacement parts for the slam latches besides replacement keys. Your best bet is going to be to change out the whole thing. The #295-000015 does have…

view full answer...

Answer 7

When changing the spring bar rating of a Fastway e2 weight distribution system like you are wanting to do with the part #FA92-01-1299 you do not have to change to a different head. So all you need is the upgraded spring bars and you'd be set.

view full answer...

Answer 8

Hey Eric, thanks for reaching out! Ultimately, I'll need more specific info on your trailer (the GVWR would be best), but I can still help you figure out how to choose a weight distribution hitch (WDH). What you'll need to look for is the max…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Dan, thanks for the information! We've actually ran into this exact situation before with the Chevy tonneau covers. The Replacement TruXedo TruXport Shur-Bond Hook-And-Loop Fastener Strips for 6-1/2' Beds item #TX1117876 can be used…

view full answer...

Answer 12

So long as your 2020 Chevy Silverado 1500 is a gas version and not a diesel, then the EcoHitch front hitch you asked about does indeed fit, with the correct part number being the following: - EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH58RR…

view full answer...

Fastway e2 Weight Distribution System Upgrade To 1,200 lbs Tongue Weight

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching