Is Brake Buddy Charge Line Kit BB54FR Compatible With Brake Buddy Classic II?

Question

Question:

Would BB54FR be compatible with Brake Buddy Classic II? The usual charger for classic II 39339 is out of stock everywhere. Thanks

asked by: Pascal L

0

Expert Reply:

The BrakeBuddy Towed Vehicle Battery Charge Kit # BB54FR you were looking at is indeed compatible with your brake Buddy Classic II. This kit works with any braking system and will even work if no braking system is used.

I included a video of the # BB54FR being installed for you to take a look at.

expert reply by: Samuel C

0

Answer 1

I can help you out. If you have parksense proximity sensors you will need the smart diode kit. If you do not have this you can use the part that you have #RM-15267. Roadmaster Wiring Kit with Smart Diodes for Variable Voltage LED Tail Lights #RM47ZR.…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 6

Thanks for the information Bob! Flat towing a leased 2025 Ford Bronco Badlands without making any modifications is going to be creative when it comes to powering your lights and a braking system but we do have all the parts you'll need. I've…

view full answer...

Answer 7

Hey Kirt, Congrats on the new car! To get your car safe to flat tow you'll need the following parts: Base-Plate #RM39FR Tow-Bar Adapter #RO64FR Lighting #RM-15267 Chargeline #RM-156-25 Air-Force One Vehicle Side #SM99209 and Hose #SM99666 (if you…

view full answer...

Answer 8

Hey Don, congrats on the new truck and thanks for all of the information! I recommend the Roadmaster Direct-Connect Base Plate Kit - item #RM87NQ. Roadmaster's baseplate kits and wiring set the standards for flat towing as far as quality and…

view full answer...

Answer 9

I sure can Galen, and thanks for the information. Since your Tiffin motorhome has the air line connection you'll need the Demco Air Force One Flat Tow Brake System for 2020 and Newer Tiffin Chassis RVs w/Factory Air Brakes item #DM55MV. This…

view full answer...

Answer 10

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

view full answer...

Answer 11

Hey Lucian! There are definitely a lot of options out there, and the best is usually a mix of parts from different manufacturers. We don't have a package under a single part number but I can give you a list of parts for a complete setup. I…

view full answer...

Answer 12

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Is Brake Buddy Charge Line Kit BB54FR Compatible With Brake Buddy Classic II?

Featured Help Information

Miscellaneous Media

Continue Researching