Do You Have A Replacement Gas Strut For My Stabilus Lift-O-Mat 654150

Question

Question:

Stabilus lift-O-Mat 654150 0550N 167/12 A 28

asked by: Robert

1

Helpful Expert Reply:

The Stabilus Lift - O -Mat 654150 has a length of 26.46". I do not offer a direct replacement, but the Solera Gas Strut 26", 124 lbs for Short and Flat Awning Arms, part # LC280343, will work for you if the eyelet connections are the same. This gas strut exerts 124 lbs of force and it measures 15.04", retracted, to 26.46", extended.

expert reply by: Mark Smith

1

Answer 1

The SumoSprings Solo Custom Helper Springs part #SSR-116-40 which have a 1,000 lb weight capacity would offer plenty of support for your 2016 Ford F-150 towing a Palomino PaloMini 142 CK. These will not effect your unloaded ride quality unless you…

view full answer...

Answer 2

Hey Mark, Based on the part numbers you provided the Replacement Gas Strut for Short and Flat Solera RV Awnings #LC280343 is going to be the best replacement option. It measures 26" extended and 15" retracted.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 10

Hello Dan, Great question. When you’re comparing the Firestone kits #F59VV and #F2582, they both technically fit your 2025 F-150, but they are designed around different mounting locations and truck configurations. The #F2582 is the traditional…

view full answer...

Answer 11

Hey Douglas, whenever available I recommend going with the HD version of the Roadactive kits like the part #RAS3611-YHD that fits your 2022 Ford F-150 4WD. The extra capacity of this kit over the non-HD basically doesn't have any downside aside…

view full answer...

Answer 12

Hey Margaret! Congrats on the truck, those are super nice! Little too much for my blood though haha. In order to install the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs #BWGNRK1020 on your 2026 GMC…

view full answer...

Do You Have A Replacement Gas Strut For My Stabilus Lift-O-Mat 654150

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching