Where is the 76227 Draw-Tite Hitch Made?

Question

Question:

Where is the hitch manufactured?

asked by: BARRY M

1

Helpful Expert Reply:

The Draw-Tite Hitch # 76227 for your 2019 Subaru Outback Wagon is manufactured in Mexico.

If you were looking for an American made hitch, the Curt # C13410 will attach the exact same way. This will have the same 4,000 pound towing capacity and 600 pound tongue weight capacity as well.

expert reply by: Lazer S

1

Answer 1

The EcoHitch Trailer Hitch #306-X7601 and Draw-Tite Trailer Hitch #76227 are very good choices for your 2019 Subaru Outback and would be my top options as well. The one thing EcoHitch normally has going for it is that is usually the only option for a…

view full answer...

Answer 2

For your 2011 Subaru Outback Wagon the best hitch for ground clearance is the Curt #C13410 which fits very tightly to the rear bumper of the vehicle but also doesn't have a crosstube that hangs below the bumper either which helps with ground…

view full answer...

Answer 3

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 4

I'm not exactly sure what you mean by "direct fit" because all three of the Class III trailer hitch receivers we carry for your 2014 Subaru Outback are custom made and designed for your vehicle. The hitch that has the most factory-like…

view full answer...

Answer 5

The trailer hitch for your Outback that has the highest receiver is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76227. This will have a measurement of 15-1/4 inches from the ground to the inside top of the…

view full answer...

Answer 6

There is very little difference in bumper clearances between the Draw-Tite Trailer Hitch Receiver #76227 and Curt Trailer Hitch Receiver #C13410 that fit your 2015 Subaru Outback. You aren't going to hit a knee on either, as the face of the hitch…

view full answer...

Answer 7

That is an excellent question, and I believe you were referring to the trailer hitches for your 2017 Subaru Outback that have concealed cross tubes, the Curt #C13410 and the Draw-Tite #76227. The Curt and Draw-Tite are both cost-effective and they…

view full answer...

Answer 8

The Curt hitch receiver item #C13410 and the Draw-Tite hitch receiver item #76227 are identical hitches in almost every way. They both have the same capacities and installation methods and are hard to identify once they're installed on a Subaru.…

view full answer...

Answer 9

I believe you are referring to the 3 concealed cross tube hitches available for the 2019 Subaru Outback Wagon, Draw-Tite Class III part #76227, Curt Class III part #C13410 and EcoHitch part #306-X7601. The Draw-Tite part #76227 hitch is the best…

view full answer...

Answer 10

I do have an option for you but the Draw-Tite Max-Frame Trailer Hitch Receiver part #76227 will only fit a Subaru Outback Wagon up to 2018. For your 2019 Subaru Outback Wagon you will want to use the Draw-Tite Max-Frame Trailer Hitch Receiver part…

view full answer...

Answer 11

You're basically hit the nail on the head with the main differences between the Draw-Tite, part #75673, and the EcoHitch, part #306-X7162. The Draw-Tite is less expensive and is a great hitch, but the EcoHitch has a cleaner more OEM look to it.…

view full answer...

Answer 12

The lightest trailer hitch for a 2015 Subaru Outback Wagon is the Curt Trailer Hitch Receiver part #C13410 at around 27 lbs follow by the Draw-Tite Max-Frame Trailer Hitch Receiver part #76227 at about 30 lbs. I think these are both great options…

view full answer...

Where is the 76227 Draw-Tite Hitch Made?

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching