Does The Draw-Tite trailer Hitch Receiver Come With One Or Two Hitch Pin Holes

Question

Question:

According to video, it mentions that the Draw-Tite has two holes for j-pin. However, the 76227 only has a single hole. Is there a different model for Draw-Tite same mount style that has two holes?

asked by: Parrish

1

Helpful Expert Reply:

Hey Parrish,

There was a design change in the Draw-Tite Max-Frame Trailer Hitch Receiver # 76227 so it unfortunately only comes with one hitch pin hole now and there unfortunately are no other compatible hitches available with a second hole for a J-pin for your 2017 Subaru Outback.

expert reply by: Kevin C

1

Answer 1

Drilling a hole in your hitch receiver will void your manufacturer's warranty if something were ever to go wrong with it. For that reason, I think the best solution to use an anti-rattle hitch pin that won't require any drilling, like the…

view full answer...

Answer 2

The least visible trailer hitch for your 2011 Subaru Outback Wagon is the Ecohitch part #306-X7162 reason being that only the hitch tube opening hangs down below the bumper. The rest of the hitches will have the entire crosstube visible.

view full answer...

Answer 3

That is an excellent question, and I believe you were referring to the trailer hitches for your 2017 Subaru Outback that have concealed cross tubes, the Curt #C13410 and the Draw-Tite #76227. The Curt and Draw-Tite are both cost-effective and they…

view full answer...

Answer 4

For your 2016 Subaru Outback I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #76227. This style of hitch is going to provide the cleanest look because the cross bar sits behind the bumper which also allows for a bit more ground clearance…

view full answer...

Answer 5

I'm not exactly sure what you mean by "direct fit" because all three of the Class III trailer hitch receivers we carry for your 2014 Subaru Outback are custom made and designed for your vehicle. The hitch that has the most factory-like…

view full answer...

Answer 6

It looks like Subaru only offers a class I, 1-1/4" trailer hitch for a 2011 Subaru Outback. Therefore, if you need a class III, 2" trailer hitch for your 2011 Subaru Outback you will have to use an aftermarket trailer hitch. The issue with…

view full answer...

Answer 7

I went out to the warehouse to take the measurements you asked for and found that the hitch measured approximately 2-1/2 inches from the center of the hitch pin hole to the end of the receiver. In terms of the receiver depth of the Draw-Tite #76227…

view full answer...

Answer 8

The EcoHitch Trailer Hitch #306-X7601 and Draw-Tite Trailer Hitch #76227 are very good choices for your 2019 Subaru Outback and would be my top options as well. The one thing EcoHitch normally has going for it is that is usually the only option for a…

view full answer...

Answer 9

The information I have says the #306-X7162 has a ground clearance measurement of 10-1/2". The Curt #C13410 has approximately 12" to 12-1/2" of clearance when measured to the bottom of the receiver. I'm not 100% sure how accurate…

view full answer...

Answer 10

The Curt #C13410 and Draw-tite #76227 are very similar in design and both have the same weight ratings of 600lbs tongue weight and 4,000lbs of trailer weight. I do like that Draw-Tite does add the additional plate of steel in between the hangers that…

view full answer...

Answer 11

The ultimate hitch for your 2017 Subaru Outback Wagon for ground clearance and towing capacity is the Stealth Hitch part #391SUOB15T which comes with wiring and everything needed to tow your vehicle including a ball mount. What makes the ground…

view full answer...

Answer 12

The lightest trailer hitch for a 2015 Subaru Outback Wagon is the Curt Trailer Hitch Receiver part #C13410 at around 27 lbs follow by the Draw-Tite Max-Frame Trailer Hitch Receiver part #76227 at about 30 lbs. I think these are both great options…

view full answer...

Does The Draw-Tite trailer Hitch Receiver Come With One Or Two Hitch Pin Holes

Continue Researching