Will the 7-Way to 5-Way and 4-Way Adapter Work on a 2005 Land Rover LR3
Updated 05/14/2013 | Published 05/09/2013 >
Question:
Will the C35FR 7 to 5 or 4 way adapter work on the factory harness?
asked by: Doug
Helpful Expert Reply:
Yes, the 7-way to 5-way and 4-way Adapter, # C35FR, will work with your 2005 Land Rover LR3 as long as your factory 7-way trailer connector. This adapter was originally designed for certain European vehicles with incandescent tail lights and factory trailer wiring that have bulb out sensors to let you know if one of your tail light bulbs are burned out.
On some European vehicles, the bulb out sensor runs through the factory trailer wiring as well. Since LEDs on trailers use only a fraction of the power that incandescent bulbs use, a trailer with LED lights can trick the vehicle into thinking that a bulb is missing. This adapter has resistors that trick the vehicle into thinking there are incandescent bulbs present on the trailer.
This adapter will work with any US spec 7-way round, blade style trailer connector (see photo) and it will also work with trailers that have LED or incandescent lights.
Product Page this Question was Asked From
7-Way to 4-Way/5-Way Trailer Adapter for Vehicles with Lamp-Out Sensors Towing Trailers with LEDs
- Custom Fit Vehicle Wiring
- Wiring Adapters
- Universal Fit
- 7 Blade to 4 Flat
- 7 Blade to 5 Flat
- Plug Only
- CURT
more information >
Continue Researching
- Shop: Trailer Wiring
- Search Results: lock n roll
- Q&A: Recommended Stabilizer Jacks for a M416 Trailer
- Shop: 7-Way to 4-Way/5-Way Trailer Adapter for Vehicles with Lamp-Out Sensors Towing Trailers with LEDs
- Search Results: hitch riser
- Search Results: 2 receiver
- Q&A: Possible Causes for Dim Trailer Lights
- Q&A: Troubleshooting LED Lighting on Trailer Not Working Behind a 2006 Land Rover LR3
- Search Results: 4 pin wiring
- Video: Ultimate Overview of the Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches
- Shop: Ark Xtreme Off-Road Swivel Jack w/ Dual Wheel - Sidewind - 7" Lift - 770 lbs - Silver
- Shop: Lock N Roll Articulating Coupler with 30" Extension - 2" Receivers - Trailer Side - 11K
- Shop: Buyers Products Weld-On Receiver Tube with 2" Hitch Receiver - 24" Long - 20K
- Q&A: Recommended A-Frame Trailer Tongue Jack for Off-Road Trailer
- Shop: Ultimate Trailer Jack - A-Frame - Topwind - 15-1/2" Lift - 2,000 lbs
- Shop: Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
- Shop: Curt Combo Bar with 2" Trailer Hitch Receiver - 36" Long - Unpainted
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)


