Locking Knobs For the Thule Aluminum Tie-Downs for Thule TracRac Sliding Ladder Rack

Question

Question:

will these work with Thule TH25100 tie downs?

asked by: John M

0

Expert Reply:

Yes, the Thule Locking TracKnobs # TH25700 will work with the Thule Aluminum Tie-Downs # TH25100.

expert reply by: Bud M

0

Answer 1

Hey Mike, thanks for reaching out. It sounds like you are looking for the replacement modular sliders for your Thule TracRac SR Sliding Ladder Rack. We have both sliders available, as well as the knobs. Take a look at the following: - Replacement…

view full answer...

Answer 2

You can try using penetrating oil to loosen the corrosion built up on the Knob #TAKB-90030-1 for your Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43003XT-501. If they still will not budge you may have to break off the knob and drill out the…

view full answer...

Answer 3

Installation is simple. You'd just unscrew the existing knobs, and screw in the locking knobs in their place. It doesn't get much easier than that! You can see a copy of the installation instructions by clicking the provided link.

view full answer...

Answer 4

The Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43002XT-781 is a fit for your 2018 Chevy Silverado with 6-1/2 foot bed. The Thule Hull-A-Port Kayak Carrier w/Tie-Downs - J-Style - Fixed - Side Loading #TH834 is compatible when using the…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 9

Hey Paul; the Thule TracRac SR #TH43002XT-780 is a really nice rack and a great choice for your 2025 Sierra 2500. Since this installs on top of the bed rails you will need a tonneau cover that mounts inside the bed rails. Also, since the uprights…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

view full answer...

Answer 12

Hello Dave, Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs #TH43003XT-000 fits both the 2020 Ford F-350 and the F-450. This would be a great fit for your 2020 F-450 Crew Cab 4WD Dually. I attached an install video to help with…

view full answer...

Locking Knobs For the Thule Aluminum Tie-Downs for Thule TracRac Sliding Ladder Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching