Can Legs of Lippert Ground Control be Replaced with Shorter Versions

Question

Question:

My 5th wheel came with Lippert Jacks 305339/344792 rear leveling jacks, but they hang lower than I’d like and have, in fact impacted curbs. Can I install instead 342610/428493 left/right to gain 2+ Inches ground clearance? Is there anything I need to worry about wrt the control system?

asked by: Jeff B

0

Expert Reply:

If you have the longer Lippert Ground Control jack legs you can convert them to the shorter ones like the part # LC342610 for the left side and # LC428493 for the right side.

expert reply by: Jameson C

0

Answer 1

I have a short-leg solution for you. I went ahead and reached out to my contact at Lippert, and she confirmed that, unfortunately, the shorter 22.5 inch legs for the Lippert Ground Control 3.0 system must be ordered individually. We do carry both the…

view full answer...

Answer 2

Yes, the Short Left Leg #LC342610 is paired correctly with the Short Right Leg #LC428493 for the Lippert Ground Control 3.0 leveling system. The foot pad is not removeable though so you'll want to take that into account for your clearance.…

view full answer...

Answer 3

Lippert actually has 2 inch shorter versions of the rear jacks of the Lippert ground control with the part #LC342610 for the left rear and then #LC428493 for the right hand side. We also have the lift kit part #RR23QX which can give your trailer a…

view full answer...

Answer 4

For your Lippert Components Power Stabilizer Trailer Jack #LC298707 the wiring is pretty simple. There are two wires that come out of the motor and they are both used as power or ground depending on the direction you want to turn the motor. To…

view full answer...

Answer 5

It sounds like you are needing to replace one of the rear legs for your Lippert Ground Control leveling system. The Rear legs have a mounting plate with 11 holes. So I believe we are on the same page here. There are going to be a few options for the…

view full answer...

Answer 6

The correct replacement leg will depend on your retracted height as well as the side the leg is on. We have the following available: -Replacement 24-1/2" Right Rear Leg #LC344792 -Replacement 22-1/2" Right Rear Leg #LC428493 -Replacement…

view full answer...

Answer 7

The matching right rear leg that is in the short size for the Lippert Ground Control is the part #LC428493 that you referenced. This is same size as the left side part #LC342610 that you have now.

view full answer...

Answer 8

Thank you for the picture with the measurement of your current Lippert Ground Control right rear leg that measures 24-1/2 inches from top to bottom when retracted. Based on that the correct replacement is the part #LC344792 and not the one you…

view full answer...

Answer 9

I have a ground clearance answer for you. As far as the shortest retracted length, the Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC428493 and the Replacement Short Left Rear Leg - Ground Control…

view full answer...

Answer 10

The foot pad of the Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC428493 is welded to inner tube to jack to help shorter the total height for more clearance. The original model has the inner tube a…

view full answer...

Answer 11

Lippert does not offer the replacement Ground Control leg part #LC342610 without the motor so the only way to order it is with it.

view full answer...

Answer 12

The Replacement Right Rear Leg for Lippert Ground Control 3.0 Electric 6 Point Leveling System #LC428493 is for the passenger side of your 2016 Coachman Brookstone 5th wheel trailer. If you need the driver's side, then you want the Replacement…

view full answer...

Can Legs of Lippert Ground Control be Replaced with Shorter Versions

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching