How to Know What Side the Lippert 3.0 Replacement Leg Goes On

Question

Question:

Is left and right orientation of trailer legs while standing in front of trailer looking towards rear?

asked by: Paul

1

Helpful Expert Reply:

The orientation of left and right is most easily explained like you are in a drivers seat. So when seated in a drivers seat your left side is left and your right side is right. So the Replacement Short Left Rear Leg # LC342610 would be for the drivers side of your trailer.

expert reply by: Scott S

1

Answer 1

Yes, the Short Left Leg #LC342610 is paired correctly with the Short Right Leg #LC428493 for the Lippert Ground Control 3.0 leveling system. The foot pad is not removeable though so you'll want to take that into account for your clearance.…

view full answer...

Answer 2

Lippert actually has 2 inch shorter versions of the rear jacks of the Lippert ground control with the part #LC342610 for the left rear and then #LC428493 for the right hand side. We also have the lift kit part #RR23QX which can give your trailer a…

view full answer...

Answer 3

I have a short-leg solution for you. I went ahead and reached out to my contact at Lippert, and she confirmed that, unfortunately, the shorter 22.5 inch legs for the Lippert Ground Control 3.0 system must be ordered individually. We do carry both the…

view full answer...

Answer 4

Thank you for the picture with the measurement of your current Lippert Ground Control right rear leg that measures 24-1/2 inches from top to bottom when retracted. Based on that the correct replacement is the part #LC344792 and not the one you…

view full answer...

Answer 5

For your 4 point Lippert Ground Control leveling system the correct wiring harness you need for the right/rear jack is the part #LC65ED and then for the correct replacement jack you would need the part #LC428493 and you'd be set with everything…

view full answer...

Answer 6

What you have on your 2017 Eclipse Attitude 5th wheel is the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System #LC675817. The correct middle replacement legs are the #LC344792 for the right side and the #LC305339 for the left side. If…

view full answer...

Answer 7

It sounds like you are needing to replace one of the rear legs for your Lippert Ground Control leveling system. The Rear legs have a mounting plate with 11 holes. So I believe we are on the same page here. There are going to be a few options for the…

view full answer...

Answer 8

The foot pad of the Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC428493 is welded to inner tube to jack to help shorter the total height for more clearance. The original model has the inner tube a…

view full answer...

Answer 9

I have a ground clearance answer for you. As far as the shortest retracted length, the Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC428493 and the Replacement Short Left Rear Leg - Ground Control…

view full answer...

Answer 10

For your Lippert Components Power Stabilizer Trailer Jack #LC298707 the wiring is pretty simple. There are two wires that come out of the motor and they are both used as power or ground depending on the direction you want to turn the motor. To…

view full answer...

Answer 11

The matching right rear leg that is in the short size for the Lippert Ground Control is the part #LC428493 that you referenced. This is same size as the left side part #LC342610 that you have now.

view full answer...

Answer 12

The correct replacement leg will depend on your retracted height as well as the side the leg is on. We have the following available: -Replacement 24-1/2" Right Rear Leg #LC344792 -Replacement 22-1/2" Right Rear Leg #LC428493 -Replacement…

view full answer...

How to Know What Side the Lippert 3.0 Replacement Leg Goes On

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching