Replacement Short Rear Legs for Lippert Ground Control 3.0  

For your 4 point Lippert Ground Control leveling system the correct wiring harness you need for the right/rear jack is the part #LC65ED and then for the correct replacement jack you would need the part #LC428493 and you'd be set with…

I have a short-leg solution for you. I went ahead and reached out to my contact at Lippert, and she confirmed that, unfortunately, the shorter 22.5 inch legs for the Lippert Ground Control 3.0 system must be ordered individually. We do carry both…

Lippert actually has 2 inch shorter versions of the rear jacks of the Lippert ground control with the part #LC342610 for the left rear and then #LC428493 for the right hand side. We also have the lift kit part #RR23QX which can give your trailer a…

Thank you for the picture with the measurement of your current Lippert Ground Control right rear leg that measures 24-1/2 inches from top to bottom when retracted. Based on that the correct replacement is the part #LC344792 and not the one you…

I have a ground clearance answer for you. As far as the shortest retracted length, the Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC428493 and the Replacement Short Left Rear Leg - Ground Control…

What you have on your 2017 Eclipse Attitude 5th wheel is the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System #LC675817. The correct middle replacement legs are the #LC344792 for the right side and the #LC305339 for the left side. If…

It sounds like you are needing to replace one of the rear legs for your Lippert Ground Control leveling system. The Rear legs have a mounting plate with 11 holes. So I believe we are on the same page here. There are going to be a few options for the…

The correct replacement leg will depend on your retracted height as well as the side the leg is on. We have the following available: -Replacement 24-1/2" Right Rear Leg #LC344792 -Replacement 22-1/2" Right Rear Leg #LC428493 -Replacement…

For your Lippert Components Power Stabilizer Trailer Jack #LC298707 the wiring is pretty simple. There are two wires that come out of the motor and they are both used as power or ground depending on the direction you want to turn the motor. To…

The matching right rear leg that is in the short size for the Lippert Ground Control is the part #LC428493 that you referenced. This is same size as the left side part #LC342610 that you have now.

The foot pad of the Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC428493 is welded to inner tube to jack to help shorter the total height for more clearance. The original model has the inner tube a…

I was honestly unsure on whether the jacks are interchangeable so I reached out to the manufacturer. For the most part you can use the Replacement 22-1/2" Left Rear Leg for Lippert Ground Control 3.0 Electric Leveling System #LC342610 (428493)…