Ultimate Overview of the Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0 Video

I went ahead and pulled this Replacement I-Beam Jack Bracket #LC349975 from our warehouse to measure. I have attached the dimensions below. Hope this Helps.

To install the Replacement I-Beam Jack Bracket #LC349975 for Lippert Ground Control 3.0 #LC358590 you'll need to follow the instructions that came with the Lippert Ground Control 3.0. I've attached a cutout from the instructions for…

I attached a dimension picture I got from Lippert for the Replacement I-Beam Jack Bracket #LC349975 that you referenced.

I have attached for you below the complete dimensions of the Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0 part #LC349975 to the degree that Lippert was willing to share. If you require further dimensions, I'd need to know…

Yes it does, what you will need are 1/2"-20 self-tapping bolts in order to install the bracket you asked about: - Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0 #LC349975

Lippert actually has 2 inch shorter versions of the rear jacks of the Lippert ground control with the part #LC342610 for the left rear and then #LC428493 for the right hand side. We also have the lift kit part #RR23QX which can give your trailer a…

Yes, the Short Left Leg #LC342610 is paired correctly with the Short Right Leg #LC428493 for the Lippert Ground Control 3.0 leveling system. The foot pad is not removeable though so you'll want to take that into account for your clearance.…

I have a short-leg solution for you. I went ahead and reached out to my contact at Lippert, and she confirmed that, unfortunately, the shorter 22.5 inch legs for the Lippert Ground Control 3.0 system must be ordered individually. We do carry both…

I reached out to my contact at Lippert and he mentioned that the Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0 #LC349975 has holes that are 0.57" diameter and designed for use with 1/2" diameter bolts.

The Replacement Short Left Rear Leg #LC342610 uses 1/2"-20 x 1-1/2" bolts to attach to the Jack Bracket for Lippert Ground Control 3.0 #LC349975. I'm not entirely certain what you are referencing in terms of "whole kit" but if…

For your 4 point Lippert Ground Control leveling system the correct wiring harness you need for the right/rear jack is the part #LC65ED and then for the correct replacement jack you would need the part #LC428493 and you'd be set with everything…

The correct replacement leg will depend on your retracted height as well as the side the leg is on. We have the following available: -Replacement 24-1/2" Right Rear Leg #LC344792 -Replacement 22-1/2" Right Rear Leg #LC428493 -Replacement…