Determining Which Replacement Hub Fits 1000 Gallon Water Wagon
Updated 08/06/2021 | Published 08/05/2021
Products Featured in This Question
Question:
looking for a replacement hub that will work for our water wagon that we use to water the roads during summer. It was welded together with whatever they could find laying around years ago. even the spindles are welded in place. As long as I can find a hub with bearings/seals etc. Ill be able to get another season out of it. let me know what you might carry to fit. See attached photos for dimensions etc. Thanks!
asked by: Josh M
Helpful Expert Reply:
We may have a hub that will work for you, but I will need to know what bearings your current hubs use.
To do this you will need to remove one of the current hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649.
If your bearings are worn to the point that you cannot read the bearing numbers then you will need to use digital calipers # PTW80157 to precisely measure your spindle in the locations shown in the included diagram. Judging by the drawing you provided I do not know if the 1-3/4" measurement is where the inner bearing goes, or where the grease seal goes as they are two different sizes.
With the above information I will be able to recommend a replacement hub for your water wagon.
(click to enlarge)
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Trailer Hub Assembly - 8 on 8" - 6,000 lb
- Trailer Hubs and Drums
- Idler Hub
- Agricultural
- 506849 / 501349
- Standard Grade
- For 6000 lbs Axles
- 5/8 Inch Stud
- 8 on 8 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- TruRyde
more information >
Continue Researching
- Search Results: mud flaps
- Search Results: plastic trailer fenders
- Search Results: trailer hitch
- Search Results: accessories and parts
- Search Results: weight distribution hitch
- Search Results: weight distribution hitch shank
- Search Results: as6000f
- Shop: Aluminum Eagle Trailer Wheel - 16" x 7" Rim - 8 on 6-1/2 - Gunmetal Gray
- Shop: Mud Flaps
- Shop: Aluminum Viking Series Valhalla Trailer Wheel - 16" x 6" - 8 on 6-1/2 - Black Spoke
- Shop: Trailer Hub Assembly - 8 on 8" - 6,000 lb
- Shop: Curt Weight Distribution Shank for 2" Hitches - 3-1/8" Drop - 7-1/8" Rise
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Curt Adjustable Weight Distribution Shank - 8"
- Shop: BulletProof Hitches Weight Distribution Shank for 2" Hitches - 8" Long - 7 Hole Adjustment
- Q&A: Longer Drop Shank For Weight Distribution System To Gain an Additional 2" of Drop
- Video: Curt Weight Distribution Shank for 2" Hitches: The Breakdown
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Measuring To Choose The Right Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Suspension Enhancement
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: How to Choose a Trailer Brake Controller
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
on Trailer Hubs and Drums
