Will Curt Spare Carrier # C31006 Fit Wheel with 6 on 8 inch Bolt Pattern

Question

Question:

Will the Curt 31006 spare tire carrier fit a mb 3500 sprinter dually/steer wheel with 6 bolt 8 inch hole pattern?

asked by: William S

1

Helpful Expert Reply:

Yes the Curt spare carrier part # C31006 that you referenced will work on the 6 on 8 inch bolt pattern your motorhome currently has.

expert reply by: Jameson C

1

Answer 1

Yes, you will be able to mount your 225/75R16 tire with a 8 lug wheel on the etrailer Hitch Mounted Spare Tire Carrier #e98ZR. I have included an image below with your same size tire and an 8-lug wheel mounted on the carrier.

view full answer...

Answer 2

The Curt Trailer Hitch Mounted Spare Tire Carrier #c31006 does have a bit of an angle, you're right, but I can't recommend using any type of shim or adapter to change the angle. That said, the angle isn't extreme, as you can see by the…

view full answer...

Answer 3

The etrailer Hitch Mounted Spare Tire Carrier #e98ZR will fit a wide variety of tires/wheels and while it doesn't have a weight capacity, it does have mounting holes that are similar to the Curt Trailer Hitch Mounted Spare Tire Carrier #c31006 so…

view full answer...

Answer 4

I walked out to the warehouse and took some measurements on the Curt Trailer Hitch Mounted Spare Tire Carrier, part #C31006. I calculated the overall diameter of your wheel and tire to be 31 inches. I measured on center from 15-1/2 inches up…

view full answer...

Answer 5

We've had a few customers come back and tell us that Grade 8 1/2 inch diameter bolts, nuts, and washers worked great to mount their spare to the Curt spare carrier part #C31006.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will Curt Spare Carrier # C31006 Fit Wheel with 6 on 8 inch Bolt Pattern

Product Page this Question was Asked From

Continue Researching