Is There a 40 Inch Long Assist Handle

Question

Question:

Do you have a polished aluminum handle that is about 40inch from center of bolt hole to bolt hole?

asked by: Roger S

0

Expert Reply:

The longest grab handle we have available is the Long Assist Handle part # PLR636-SS which measures 40-3/4" from the outer mounting holes on center. It is made of a polished stainless steel.

expert reply by: Conner L

0

Answer 1

The 36" Long Assist Handle #PLR636-SS has 5/16" diameter openings for the mounting hardware. You will need to select the correct length screws depending on the construction of the material you are mounting the handle to.

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hi Rick, I'm so sorry that happened with your ATV, it sounds really scary! To secure it to your tilt trailer and keep that from happening again, the etrailer E Track Wheel Tie Down Straps w/Roller Idlers part #e64PR you were looking at will do…

view full answer...

Answer 6

Hey Jordan! Yes, the Global Link Vise Lock #295-000024, Global Link RV Entry Door Locking Latch #295-000019, and Replacement Cam Lock Cylinder #295-000005 can all use the same key. Just make sure you choose the keyed alike option for each one before…

view full answer...

Answer 7

Hey Debbie. We've got a couple of options for handrails that work with MORryde steps, like the item #MR34RV and item #MR83AR. Which one you need is going to depend on what model of steps you have and on certain ones how many actual steps there…

view full answer...

Answer 8

For your 2021 Keystone Passport SL Travel Trailer with an entry height of 32" and door width of 24", yes, the correct the MORryde StepAbove RV Steps, #MR98RR is for 23-3/4" to 26-1/4" wide doorways and entry height of…

view full answer...

Answer 9

Hey Peter, so the only MORryde StepAbove steps that have hand rails available are the 3 and 4 step options. The 2 step part #MR85HR does not have a step option.

view full answer...

Answer 10

Yes, we do depending on what kind of steps you have and how tall they are. The Handrail for Second Generation 3-Step MORryde Steps item #MR83AR fits steps like the MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps…

view full answer...

Answer 11

On the Global Link Vise Lock #295-000024 the single bottom screw (just below the lock cylinder) is protected from corrosion by a press-in plastic cap. I went to our warehouse to check this item myself. This cap is best removed by prying it off with a…

view full answer...

Answer 12

My technical contact at Global Link advised that for their locks like #295-000021 that you referenced which use a flat key they do not offer a tube-type re-keying kit. We do have tubular key lock replacement parts from Camco, such as #CAM44303 and…

view full answer...

Is There a 40 Inch Long Assist Handle

Product Page this Question was Asked From

Continue Researching