Fit of SnapPad EQ Octagon for 2017 Newmar Baystar

Question

Question:

2017 Newmar Baystar 2812 It has 4 Octagon Feet I need the EQ Octagon 4 pack Your description says 10inch Octagon ROUND just trying to make sure all for Octagon feet thank you

asked by: Mark C

0

Expert Reply:

The SnapPad EQ, # SN76FR will fit 10" octagon or concave round jack feet.

expert reply by: Michael R

0

Answer 1

Hello Jill, Great question! Yes, the SnapPad XTRA Jack Pads for Lippert leveling systems with 9" round jack feet #SP54FR4 are permanent snap-on pads. Once they’re installed, they stay on the jack feet, so you won’t need to crawl around placing…

view full answer...

Answer 2

For your Lippert Level Up Hydraulic Leveling System, you can use the: -Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269. These replacement feet are 9" in diameter, and also includes the o-rings, the bolt, and…

view full answer...

Answer 3

Personally I prefer the SnapPad XTRA Jack Pads #SP54FR4 over the Stromberg Carlson #SC99MR as they have been around much longer and proven themselves to be a quality product. Both these will fit 4 jacks with a 9" round landing pad.

view full answer...

Answer 4

The replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System - Qty 1 #LC324269 needs to be torqued to 132 ft-lb and Lippert recommends using some Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 11

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 12

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Fit of SnapPad EQ Octagon for 2017 Newmar Baystar

Product Page this Question was Asked From

Continue Researching