Carbon Canister Relocation Kit for Draw-Tite 76046 Hitch on 2019 Chrysler Pacifica Hybrid

Question

Question:

Hello, I have a Chrysler Pacifica HYBRID 2019. And I bought an Reese Towpower 84046 Class III Custom-Fit Hitch with 2inch Square Receiver Opening. Now I need an Hitch Hybrid Models service kit that relocates the carbon canister.

asked by: Peter

0

Expert Reply:

We do offer the relocation kit that's needed to install the Reese 84046 (which we offer as part # 76046) as part # 76046SK.

expert reply by: Mike L

0

Answer 1

Curt has confirmed that their 13466 Class III hitch, which we offer as part #C29UR is a confirmed fit for the 2021 Chrysler Pacifica, hybrid model only. I've even checked their website to confirm it for you. You can look over the installation…

view full answer...

Answer 2

We do offer a concealed-style Curt Class III hitch that will fit your 2020 Chrysler Pacifica, but the #C65CR that you'd looked at isn't compatible with the Hybrid model. For the Hybrid, you'd want to go with the similar #C29UR. The hitch…

view full answer...

Answer 3

The Curt #C29UR and the Draw Tite part #76046-SK are definitely the most hidden options for your 2021 Chrysler Pacifica Hybrid but the edge goes to the Curt in terms of least visible since the safety chain loops are horizontal and smaller. I attached…

view full answer...

Answer 4

For a 2023 Chrysler Pacifica Hybrid I recommend the Curt Trailer Hitch Receiver #C29UR. The cross tube of this hitch sits higher up for a more hidden look so all you'll see is the receiver tube. It has a 4,000lb GTW and 400lb TW capacity, but…

view full answer...

Answer 5

Yes, when installing the Tekonsha trailer wiring kit part #TK96FR in your 2021 Chrysler Pacifica you can run the battery wire to the auxiliary battery at the rear instead of all the way to the front.

view full answer...

Answer 6

We have a version of the Draw Tite hitch you referenced that does fit the hybrid models of your 2017 Chrysler Pacifica with the part #76046-SK but the #76046 does not fit the hybrid models.

view full answer...

Answer 7

For your hybrid 2022 Chrysler Pacifica, the best option we have is the Curt Hitch - 2" #C29UR. The great thing about the Curt hitch is that it comes with a gloss outer coating over the base coat that provides superior rust and corrosion…

view full answer...

Answer 8

We have all of the parts you need! To be able to tow a trailer with your 2021 Chrysler Pacifica non-hybrid that does not have the tow package you will need a trailer hitch receiver, a vehicle wiring harness, and a ball mount, hitch ball, and hitch…

view full answer...

Answer 9

I recommend the Curt Trailer Hitch Receiver #C29UR for your 2022 Chrysler Pacifica PHEV. This hitch fits all models and won't require an additional kit to fit the hybrid. It has a 2" receiver and max tongue weight of 400 lbs which will be…

view full answer...

Answer 10

The Curt hitch part #C29UR that fits the 2018 Chrysler Pacifica does not have any additional steps required to install beyond what's mentioned in the detailed instructions link attached to this page. The other fit part #C65CR that's for the…

view full answer...

Answer 11

That is correct. To install the Curt Trailer Hitch Receiver #C29UR on your 2018 Chrysler Pacifica Hybrid you will need to remove two the exhaust hangers from the rubber isolators, and support the exhaust to make sure it does not get damaged. Next you…

view full answer...

Answer 12

There's actually a third custom wiring harness that fits the 2017 Chrysler Pacifica. As to which you need depends on which trim package you have: Draw-Tite part #118712 fits the Limited, Touring L, and Touring L Plus models. Draw-Tite part…

view full answer...

Carbon Canister Relocation Kit for Draw-Tite 76046 Hitch on 2019 Chrysler Pacifica Hybrid

Continue Researching