Replacement Bushing and Rubber Core for E-Z Flex Equalizers
Updated 07/16/2021 | Published 07/15/2021
Products Featured in This Question
Question:
is the big center bushing on an ez flex equalizer available its about 1 inch ID and 1.25 in OD and 7/8 long? And the steel bushing thats fits inside that the hanger bolt goes thru. Also is the rubber shock absorber available Thanks
asked by: Brian J
Expert Reply:
A replacement equalizer will be necessary if the rubber core needs to be replaced. If you measure your equalizer you will be able to determine which replacement you need.
For example, the # 013-144-03 Replacement Equalizer measures 7-3/4" from center hole to center hole. If you provide me with this information I would be happy to make a recommendation. As for the bushing, we do not have replacements based on the measurements you provided.
I have attached a picture showing the measurement for your reference.
(click to enlarge)
Product Page this Question was Asked From
Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1
- Trailer Suspension Parts
- Bushings
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 9/16 Inch ID x 11/16 Inch OD
- 1-3/4 Inch Long
- Dexter
more information >
Continue Researching
- Search Results: dexter 13~144
- Search Results: bronze bushing trailer leaf springs
- Shop: Replacement Dexter Triple-Axle Trailer E-Z Flex Equalizer for 1-3/4" Wide Double-Eye Springs
- Video: Review of Lippert Trailer Suspension Parts - Bushings Nylon - LC52RP
- Video: Installation Guide for the Dexter Bronze Bushings on a 2022 Grand Design Imagine Travel Trailer
- Q&A: Replacement Bushings for Dexter E-Z Flex Equalizers
- Video: Let’s Check Out the Replacement Equalizer for E-Z Flex Suspension Kits
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: Leaf Spring Bushing - Bronze - 1.74" Long x 0.70" OD x 0.58" ID - Qty 1
- Shop: Nylon Bushings - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 4
- Q&A: Replacement For Dexter E-Z Flex Equalizer 13-144
- Q&A: Does Dexter E-Z Flex Suspension Kit Have a Torque Spec
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 6,000 lbs
- Q&A: K71-656-00 E-Z-Flex Bushing Dimensions
- Q&A: Torque Rating Requirements for Installing Leaf Springs on a 7000 lb Tandem Axle Trailer
- Q&A: How Tight Do Leaf Spring Bolts Need To Be?
- Q&A: Can Nylon Bushings Be Replaced With Bronze Bushings And Wet Bolts
- Shop: E-Z Flex Equalizer for 1-3/4" Double Eye Springs - 8-3/8" Long - 9/16" Center Hole
- Shop: Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1
- Video: The Low-Down on the Mystik JT-6 High Performace Synthetic Grease
- Video: Feature Review E-Z Flex Equalizer for 1-3/4" Double Eye Springs
- Video: What to Know About the Zinc Shackle Bolt with Locknut for Double-Eye Springs
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
on Trailer Suspension Parts
