Do The Custer LED Side Marker/Clearance Lights Require a Gasket to Install?
Updated 07/14/2021 | Published 07/08/2021
Question:
I just purchased two Custer LED Side Marker - Clearance Trailer Lightsfoot Item no. CPL120A. The description indicates surface mounting hardware is not included. I assumed this was the nut and bolts needed to attached the light to the trailer. However when I recieved the light it appears that there should be a rubber gasket or similar that should be placed between the light and the mounting surface. Do you sell this part? Please provide a part no. and cost for this item. I am in need of two pieces. Thank you
asked by: Randy C
Expert Reply:
The Custer LED Side Marker or Clearance Trailer Light # CPL120A doesn't require a rubber gasket. The wiring and LED's are sealed completely and there is no need for a gasket.
If you are running the wiring into the wall be sure to use silicone to seal the hole where the wire enters the trailer to prevent any water damage.
(click to enlarge)
Product Page this Question was Asked From
Custer LED Side Marker or Clearance Trailer Light - Submersible - 16 Diodes - Amber Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 4L x 2W Inch
- Amber
- Custer
more information >
Continue Researching
- Search Results: a32gb
- Q&A: Foam Gasket For Optronics MCL0032 Series Marker/Clearance Lights
- Q&A: Replacement LED Marker/Clearance Lamps for Peterson PM130 on 1998 4Star Horse Trailer
- Q&A: Installation of Optronics LED Clearance or Side Marker Trailer Light With Yellow and White Wire
- Search Results: reverse lights
- Search Results: torx screws
- Search Results: charger
- Search Results: receptical
- Search Results: trailer tool box
- Search Results: trailer lights
- Shop: PVC Grommet for 6-1/2" Oval Trailer Tail Lights
- Video: Let’s Check Out the PVC Grommet for 6-1/2" Oval Trailer Tail Lights
- Video: LED Clearance or Side Marker Trailer Light w/ Reflector Spec Review
- Video: Breaking Down the LED Clearance or Side Marker Trailer Light w/ Reflector
- Shop: Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Black
- Shop: Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Polished Chrome
- Shop: RV Exterior Lighting
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Shop: Optronics ONE LED Backup Light for Truck or Trailer - Submersible - 1 Diode - Oval - Clear Lens
- Shop: LED Clearance or Side Marker Light w/ Reflector - Submersible - 4 Diode - Rectangle - Amber Lens
- Shop: Optronics Closed Cell Foam Gasket for MCL76 Series Clearance or Side Marker Lights
- Shop: LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Black Base - Amber Lens
- Q&A: Foam Gasket to Install Optronics MC32 Series Amber LED Clearance Light MCL32ATB
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Troubleshooting Trailer Lights Not Working on Gooseneck Trailer
- Video: A Closer Look at the Hook Probe Circuit Tester
- Video: What to Know About the Hook Probe Circuit Tester
- Q&A: Recommended Clearance Marker Light Gasket for 4 Inch by 2 Inch Lights
- Video: An In-Depth Look at the Rubber Bumper
- Video: All You Need to Know About the Side-Door Bar Lock Assembly
on Trailer Lights
