Does Air Lift Load Lifter 5000 Require Lift Spacer with 1 inch Lift 2021 Ram 3500

Question

Question:

2021 ram 3500 4WD with a 1” rear lift. Do I need a spacer for the load lifter 5000?

asked by: Mik B

0

Expert Reply:

If you only have a 1 inch lift you wouldn't need a spacer when installing the Air Lift Load Lifter 5000 part # AL88231 on your 2021 Ram 3500.

expert reply by: Jameson C

0

Answer 1

The #PD4045KA is a single stage charger of 14.6 VDC and does not allow for adjustment. If you want a 2-stage lithium charge, you need to go with the stand-alone deck mount style #PD9145ALV and remove the existing Printed Circuit Board in your…

view full answer...

Answer 2

Hello Curtis, thanks for reaching out. For your 2012 Ram 2500 I recommend the Air Lift LoadLifter 5000 Air Helper Springs #AL57295. Air lift makes spacers for lifted trucks, but if you are unsure of how much lift you have, you will need to measure to…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Hey Randy thanks for the information! Here are the parts you'll need to add a brake controller to your 2006 Dodge Ram 1500 with a factory 4-Way connector: Brake Controller and Custom Fit Wiring Harness - Curt TriFlex NEXT item #C43GV 7-Way…

view full answer...

Answer 5

Hey David, we have everything we need to flat tow your 2006 Dodge Ram 1500 4WD but the first thing you need is a base plate kit like the Blue Ox part #BX1988 which I like because in my experience the Blue Ox kits are just really well made and easier…

view full answer...

Answer 6

If your 2006 Dodge Ram 2500 already has the B&W Underbed Kit #BWGNRK1308-5W installed, then the B&W Companion #BWRVK3400-5W is definitely the best option for towing a fifth-wheel trailer. The Companions are considered by many to be the best…

view full answer...

Answer 7

You sure do Greg! Which is why the MORryde X-Factor Crossmember for Standard Frame Hangers item #MR33WR comes with longer suspension bolts. These bolts will replace the ones currently being used on your trailer's spring hangers. The X-Factor…

view full answer...

Answer 8

On the 2006 Dodge Ram 1500 that came with either a factory 4-Way or 7-Way trailer connector the receptacle to plug in a brake controller with a harness such as #3020-P will either be on top of or along the side of a white rectangular box back along…

view full answer...

Answer 9

Hey Kyle! What kind of camper do you have? There are camper tie-downs available for your 2006 Dodge Ram 3500 Dually. However, I will need to know what kind of hitch you have, along with running boards (none, cab length, wheel to wheel) to find the…

view full answer...

Answer 10

Hey John! With the CRE3000 on your Reflection you need the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR. The same crossmember will be used on all three sets of hangers. The one thing I would do is take a look under your trailer to…

view full answer...

Answer 11

Unfortunately Jensen keeps discontinuing their stereos so at this time I don't have a good replacement for the VM9726BT. The only stereos we currently have wouldn't be touchscreen or have the compatibility with a camera system if you have one…

view full answer...

Answer 12

I recommend using the Curt Trailer Hitch Receiver #C15809 for your 2006 Dodge Ram 3500. This is a Class V trailer hitch with a 2-1/2" receiver. It has a Gross Towing Weight (GTW) rating of 20,000 lbs and a Tongue Weight (TW) rating of 2,700 lbs.…

view full answer...

Does Air Lift Load Lifter 5000 Require Lift Spacer with 1 inch Lift 2021 Ram 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching