JT's Strong Arm Jack Stabilizer Kit For Winnebago Minnie Travel Trailer With Electric Stabilizers

Question

Question:

Is the travel trailer kit compatible with the telescoping jacks on the Winnebago Minnie 2401RG?

asked by: Lora

0

Expert Reply:

For the electric stabilizing jacks that come on the Winnebago Minnie 2401RG you will need a set of the Electric Stabilizer Jack Pad Adapter for JT's Strong Arm Jack Stabilizer Kits # LC314597. These adapters will bolt onto the stabilizer providing a place for the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers # LC191025 to mount.

I have linked the instructions for the adapters and JT's Strong Arms below for you to reference how they install.

expert reply by: Bud M

0

Answer 1

In regards to your stabilizer jacks being installed at 45 degree angles, I believe you are referring to telescoping jacks. If they look like what is shown in the accompanying photo then yes, you will be able to use the JT's Strong Arm Jack…

view full answer...

Answer 2

For your 2018 Rockwood travel trailer with a Lippert electric stabilizer, all you need in order to use the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers #LC191025 is the Electric Stabilizer Jack Pad Adapter #LC314597. I have added a…

view full answer...

Answer 3

Hey Jan, yes you do want to use the safety chain set part #RM3230 with the Andersen Ultimate fifth wheel hitch to gooseneck adapter part #3220. The reason is goofy but if there's a hitch ball involved at all with the connection safety chains are…

view full answer...

Answer 4

Hey Ed, congratulations on the new motorhome! For a surge protector I would stick with the Watchdog models from Hughes Autoformers. These are nice because the surge model can be replaced if you actually experience a surge instead of replacing the…

view full answer...

Answer 5

Hey Bob. You can leave the B&W Continuum item #BW44BR connected to the trailer but it's better to leave the shank portion on the truck/tow vehicle. What kind of trailer do you have and what tow vehicle are you using? You can add this…

view full answer...

Answer 6

The only difference between the JT's Strong Arm Jack Stabilizer Kit #LC191023 and #LC191025 is that #LC191023 is deigned for 5th wheel RV's that have 58" or more between the front landing gear legs, while #LC191025 is designed to be used…

view full answer...

Answer 7

Hey Jon! The Lippert High-Speed Power Stabilizer Jack #LC298707 may fit your R-Pod but you will have to look at your frame to see if it will work. The mounting hole spacing is 68-11/16" from center-hole to center-hole. If that lines up with your…

view full answer...

Answer 8

Hey Richard, You will not want to use the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers #LC191025 and SnapPad SnapJack SJ RV Scissor Jack Pads #SN32FR together, no. They use different hardware so are not compatible, but both will do a…

view full answer...

JT's Strong Arm Jack Stabilizer Kit For Winnebago Minnie Travel Trailer With Electric Stabilizers

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching