Recommended Trailer Hitch Receiver and Wiring Harness For a 2019 Mercedes-Benz Metris

Question

Question:

I have 2019 Mercedes metris. Does this come with light connections? If not, do you sell separately?

asked by: Casey H

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver # 76015 is confirmed to fit your 2019 Mercedes-Benz Metris. It does not include any electrical connectors for your Metris.

I recommend the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT to give your Metris a 4-way flat trailer connection. This system uses sensors to detect power traveling through the taillight wiring so the you do not have to splice into your factory harness and cause excess strain on the factory wiring. A Mounting Bracket # 18144 will allow you to secure the 4-way to the tab on the Draw-Tite receiver.

expert reply by: Bud M

0

Answer 1

Let's go ahead and start with the trailer hitch for the 2023 Mercedes-Benz Metris, with the correct fit being the following: - Curt Trailer Hitch Receiver #C13276 Then for the wiring, a 4-way and 7-way is needed to activate the brake controller,…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 9

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Answer 10

Hi John! We definitely have hitches available for your 2026 Lexus RX350h and the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e29ZV is a great option. The matte finish makes our hitches blend in better than…

view full answer...

Answer 11

Good morning to you as well Steve, and congrats on your new van! I would be more than happy to make a recommendation for you! The best hitch for your 2026 Toyota Sienna, is going to be our etrailer item #e56RR. This is a class III hitch with a…

view full answer...

Answer 12

Thanks for supporting a local business Christopher! So long as your 2012 Chevrolet Silverado is a 1500 and you need a class IV hitch, the Curt item #14301 is going to be the best option. It has a 2" receiver with a 10,000 lbs towing capacity and…

view full answer...

Recommended Trailer Hitch Receiver and Wiring Harness For a 2019 Mercedes-Benz Metris

Featured Help Information

Miscellaneous Media

Continue Researching