Front and Rear Suspension Support for 2020 Toyota Tundra

Question

Question:

jameson c recommended ras34fr for the rear suspensionon for my truck so I ordered it, my question is if the truck is not level what would you recommend to level the front end?

asked by: RODNEY T

0

Expert Reply:

For front suspension support for your 2020 Toyota Tundra we have the Timbren kit part # TABSTOF which would give more support up front while the # RAS34FR would work great out back.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 6

Hey Fernando, I'd be happy to help you pick out the correct Timbren rear suspension kit for your 2023 Toyota Tacoma TRD that will be towing a trailer. Really it comes down to two options. You would want the part #TTORTUN4L for if you have the 3…

view full answer...

Answer 7

Sure, I can help with that. I can see why the fitment notes are confusing. For a 2012 Toyota Tundra with the factory tow package and factory 7 way connector, you'll want a brake controller that plugs into the factory brake controller port under…

view full answer...

Answer 8

Hey Mark! Weigh Safe does not offer a locking pin for the True Tow #WS94RR hitch ball. I'm sure the thinking behind it is that you're either towing with a trailer hooked up so the ball can't be removed, or you aren't towing and store…

view full answer...

Answer 9

Hey Brad, thanks for reaching out. The factory brake controllers they put in the 2015 GMC trucks are largely incompatible with EOH brakes. That is one of the specific model years we see a lot of issues with since they don't have an EOH mode.…

view full answer...

Front and Rear Suspension Support for 2020 Toyota Tundra

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching