Thule Atlantis 1800 Hardware Replacement

Question

Question:

Hi, Will TH94JV fit a Thule Atlantis 1800? Thanks,

asked by: Jeff A

0

Expert Reply:

We do have replacement mounting hardware for your older Thule Atlantis 1800 687 cargo box!

The Quick Grip is part # TH05738, and then we also have the Slide Strip # TH05401 and the Replacement Cradle # TH8523387001 as well if you're needing those.

expert reply by: Jameson C

0

Answer 1

It sounds like you are talking about cradle #TH8523387001. The screw is #TH05728. If these aren't the parts you are looking for let me know.

view full answer...

Answer 2

To replace the mounting hardware that came with your Thule Atlantis 2100 roof cargo box you need the following parts: - Quick Grip Mount Assembly #TH05738 - Slide Strip #TH05401 - Snapfit Cradle Replacement Kit #TH68NB The Quick Grip and Slide Strip…

view full answer...

Answer 3

The replacement Quick Grip Cradles, #TH8523387001, and the Quick Grip Mount Assembly, #TH05738, are sold in quantities of 1 only. To replace 4 assemblies in a cargo box, you will need 4 of each. You may also need 4 of the Replacement Slide Strips,…

view full answer...

Answer 4

The Replacement Slide Strip part #TH05401 that you referenced has been confirmed to fit your Thule Atlantis 1600XT cargo box so I would recommend it for you. The Replacement Cradle for Thule AcuTight Mounting Hardware, #TH8523387001, also fits the…

view full answer...

Answer 5

We do have replacement mounting hardware for your older Thule Atlantis 1800 687 cargo box! The Quick Grip is part #TH05738, and then we also have the Slide Strip #TH05401 and the Replacement Cradle #TH8523387001 as well if you're needing those.

view full answer...

Answer 6

Yes, the AcuTight system is basically just an upgraded QuickGrip system so you could upgrade your Quickgrips out of your Atlantis 1800 to the Acutight system by installing the part #TH7521484001. Both systems use the same cradles part #TH8523387001.

view full answer...

Answer 7

Would you be able to send me some photos of your roof box and the area where the mounting hardware is installed? If you have a newer Thule/MB cargo box then the Replacement Quick Grip Mount Assembly #TH05738 should work but if I could see some photos…

view full answer...

Answer 8

I pulled a Replacement Tie-Down Strap for Thule Roof Mounted Cargo Boxes #10169 from our warehouse and found that it is 3/4 of an inch in width. This product is designed to loop through slots on Thule cargo boxes with EasySnap housings to keep the…

view full answer...

Answer 9

Thanks so much for the photo and the info on your cargo box model. I'm not 100 percent certain which part you are referring to, so I will list all of the available replacement parts for your Thule Atlantis 1600XT cargo box, which I confirmed with…

view full answer...

Answer 10

I pulled a Replacement Tie-Down Strap #10169 from our warehouse to measure for you and found that it measures 9 feet 8-1/2 inches if you measure from the end of the strap all the way to the end of the plastic buckle, and that if you measure just the…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Thule Atlantis 1800 Hardware Replacement

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching