Replacement Mounting Hardware for Older Thule Atlantis 1800 Roof Cargo Box

Question

Question:

I have an older Atlantis 1800 ski box and need to replace the quick grips and the cradles. Do you still have parts for this older model and what numbers would I order? Thanks!

asked by: Robert P

1

Helpful Expert Reply:

We do have replacement mounting hardware for your older Thule Atlantis 1800 687 cargo box!

The Quick Grip is part # TH05738, and then we also have the Slide Strip # TH05401 and the Replacement Cradle # TH8523387001 as well if you're needing those.

expert reply by: Jon G

1

Answer 1

Hey Jim, thanks for reaching out. Yes, the Replacement Quick Grip Mount Assembly #TH05738 will indeed work with the Thule Atlantis 200 cargo box. We don't have an install video for these, but I can provide some general instructions for you. The…

view full answer...

Answer 2

Yes, the AcuTight system is basically just an upgraded QuickGrip system so you could upgrade your Quickgrips out of your Atlantis 1800 to the Acutight system by installing the part #TH7521484001. Both systems use the same cradles part #TH8523387001.

view full answer...

Answer 3

Thank you for the picture! So right off I can say that you will need to get more than 1 of the Replacement Cradle #TH8523387001. Since it's a different design than the other 3 I recommend picking up 2 of these and using them for the Quick Grip…

view full answer...

Answer 4

The flat side of the Replacement Cradle for Thule AcuTight and Quick Grip Mounting Hardware part #TH8523387001 will go against the bottom of the cargo box which you can see in the attached photo. Therefore, the screw hole will be facing down towards…

view full answer...

Answer 5

You can't just replace the rubber pieces you will need to replace the entire clamp. Which clamp you need depends on which Thule box you have. If your box is the Thule Pulse Alpine (613), Pulse Medium (614), or Pulse Large (615) you will want the…

view full answer...

Answer 6

The mounting hardware for the Thule Hyper XL TH612 is the part #TH7521484001 which is designed to fit bar dimensions of up to 3-1/2" wide x 1-11/16" tall. If you have bars that are taller than 1-11/16 inches there won't be a way to make…

view full answer...

Answer 7

We do have replacement mounting hardware for your older Thule Atlantis 1800 687 cargo box! The Quick Grip is part #TH05738, and then we also have the Slide Strip #TH05401 and the Replacement Cradle #TH8523387001 as well if you're needing those.

view full answer...

Answer 8

Your pictures didn't make it through, but your box should NOT be opening while traveling down the highway. It sounds like you are having an issue with the lifter and would need to replace it with the part #TH14936 which is the correct part for…

view full answer...

Answer 9

The Replacement Slide Strip #TH05401 is the correct replacement for your Thule Ascent 1700 605. The Replacement Quick Grip Mount Assembly #TH05738 and Thule Snapfit Cradle Replacement Kit #TH68NB are the correct parts for your cargo carrier.

view full answer...

Answer 10

Yes, the Thule Replacement Cradles #TH8523387001 with Screws #TH05728 that you referenced are correct replacements for your Thule Atlantis series cargo box.

view full answer...

Answer 11

The piece you're speaking of is what Thule refers to as an AcuTight cradle. It isn't included with the #TH94JV fast grip clamp, but is available separately as part #TH8523387001. I've linked to product description videos for the…

view full answer...

Answer 12

Yes, the Acutight Replacement Cradle #TH8523387001 that you referenced would be the correct replacement cradle for your Thule Spirit Cargo Box 1600XT because this box uses the AcuTight installation hardware. This cradle also fits the last generation…

view full answer...

Replacement Mounting Hardware for Older Thule Atlantis 1800 Roof Cargo Box

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching