Roof Vent To Fit 14" x 14" Rough Opening

Question

Question:

Do you have a roof vent that will fit a 14inch x 14inch without trimming? That us what I am looking for.

asked by: Nick K

0

Expert Reply:

The Camco # CAM40480 that you referred to will fit your 14"X14" roof opening as long as you roof thickness is between 1-1/4" to 2-1/4" thick.

expert reply by: Les D

0

Answer 1

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 4

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 5

Hey Daniel, do make cutting the Replacement Cut-To-Fit Slide Topper Fabric for Solera RV Slide-Out Awnings #SO84VR as easy as possible I would recommend using fabric scissors. What slide topper you are looking to replace the fabric of?

view full answer...

Answer 6

Unfortunately, it will not Brian but thanks for the picture. Our Replacement Fabric for etrailer Slide-Out Toppers has a different attachment method so it will not work with your Solera RV Slide-Out Awning item #LCV000177334. The only replacement…

view full answer...

Answer 7

Hey Cindy, the PowerMax Membrane Plus RV Roof Replacement Kit w/ Rolled PVC Membrane #PM78VR is rolled. So it ships on a roll and is not folded.

view full answer...

Answer 8

I spoke with my contact at MaxxAir regarding the MaxxFan Deluxe Roof Vent #MA00-05301K that you referenced. He stated that the printed circuit board on this unit would not be able to handle reversing the polarity. Doing this would likely burn up the…

view full answer...

Answer 9

You do not want to use the ASA to replace your duo therm. You're going to want to replace it with a Dometic unit #DMC33ZR instead.

view full answer...

Answer 10

Hey, Darrell. On the Ventline Vent #M1659VEN, the main crossbar is riveted in place. The good news is that the lift arm and the rest of the components are bolted on, so will be easy for repairs if needed down the road. What kind of camper or trailer…

view full answer...

Answer 11

Hey Steve, we don't have any couplers that are designed to fit a channel that wide but we do have a solution that could work for you. What you could do is go with a channel coupler #PSA256S0303 and then weld on a channel bracket #BDAC5000300 to…

view full answer...

Roof Vent To Fit 14" x 14" Rough Opening

Product Page this Question was Asked From

Continue Researching