How Thick Is The Curt Aluminum Ball Mount C84WR Where Hitch Ball Gets Installed?

Question

Question:

Hello, What is the thickness of the surface where the ball mounts to? Thank you,

asked by: Chris

0

Expert Reply:

I reached out to my contact at Curt and the Curt Aluminum Ball Mount # C84WR you were looking at measures 1" thick where the hitch ball mounts.

expert reply by: Samuel C

0

Dimensions Of Curt # C84WR
(click to enlarge)

Answer 1

Hey John, welcome back! For a dual hitch receiver with a 10" drop or rise, I recommend the Roadmaster Dual Hitch Receiver Adapter item #RM23SR. This adapter is going to insert directly to your motorhome's 2" receiver. It'll provide…

view full answer...

Answer 2

Hey Jeff, thanks for reaching out, and thanks for attaching that photo - that makes this easy! I went and grabbed one of the 068-6 Road Master Dual Receiver Hitches #RM48BQ from our warehouse and got all the measurements you were wanting. I edited…

view full answer...

Answer 3

Hey Jeffrey! the overall height of the Roadmaster Dual Hitch Receiver Adapter #RM68BQ is 11-1/4". The distance from the hitch pin hole to the top receiver hitch pin hole is 8-1/4". I attached a picture the full dimensions below. What are…

view full answer...

Answer 4

If you use the Tongue Extension Kit #Y08109 along with your Rack and Roll Trailer #Y08107 then you will be able to transport your two 18-foot kayaks provided their combined weight does not exceed the trailer's limit of 250-lbs. If you need to add…

view full answer...

Answer 5

I think the images are coincidences. It is always a good idea to use bow and stern tie downs when transporting something long like a kayak or canoe. It is not necessary in all places but may be required by state or local laws in others. So better…

view full answer...

Answer 6

Hey Michael, The wheel for your Yakima Rack And Roll Kayak Trailer #Y08106 would be held in place with a single bolt. The bolt head would stick out past the wheel so you should be able to use another wrench to hold the bolt while you torque down the…

view full answer...

Answer 7

I spoke to my contact at Yakima and she informed me that since your kayaks will be behind your vehicle and not on top it is not as important to have the kayaks strapped down when used on the Yakima Rack and Roll Trailer #Y08106. She did recommend…

view full answer...

Answer 8

I spoke with my contact at Yakima and although the Round 78 Inch CrossBars, #Y00411, will fit on the Yakima 66 Inch Rack and Roll Trailer, #Y08106, with out the Crossmember Conversion Kit, #Y08111, we can not recommend doing this. Since the Yakima 66…

view full answer...

Answer 9

I also confirmed with my contact at Yakima that the Heavy Duty Shocks #Y08110 are not recommended for the 66 inch Rack and Roll Trailer #Y08106. The shocks should only be used to upgrade the 78 inch trailer #Y08107. In order to use the Heavy Duty…

view full answer...

Answer 10

I have another option for you but unfortunately the Yakima Rack and Roll Trailer #Y08107 cannot accept any other style of crossbar, as it was only designed to use the round Yakima crossbars. Instead I recommend the Yakima EasyRider Double Decker…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

How Thick Is The Curt Aluminum Ball Mount C84WR Where Hitch Ball Gets Installed?

Product Page this Question was Asked From

Continue Researching