Is the Dexter Drop-N-Go 099-175-20 a Good Replacement for an Atwood 61101?
Updated 06/08/2021 | Published 06/06/2021
Question:
is this the right replacement for my arwood 61101 hydrolic disk brake actuator
asked by: Bryce H
Helpful Expert Reply:
As Atwood is no longer in production, finding replacements can be a bit of a pain. That being said, the Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-20 will be a good replacement for your Atwood 61101. This will handle disc brakes and has a 7,500 pound capacity. From the pictures I could find, it looks like the # 099-175-20 may bolt right to the same bolts holes as the Atwood, but don't quote me on that as I don't have a way to confirm it..
Product Page this Question was Asked From
Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- Electric Lockout
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: brake actuator
- Video: Review of Demco Brake Actuator - DA75 Trailer Drum Brake Actuator - DM28CV
- Video: Review of Demco Manual Lock Out Kit Model DA75 - DM93CV
- Video: Review of Dexter Brake Actuator - Surge Brake Actuator - DX79UR
- Video: What to Know About the Demco Hydraulic Brake Actuator-DM72VR
- Shop: Demco DA86 Brake Actuator for Disc Brakes w/ Solenoid - Zinc Plated - 2" Ball - 8,600 lbs
- Shop: Demco DA75 Trailer Brake Actuator for Disc Brakes - Black Powder Coat - 2" Ball - 7,500 lbs
- Shop: Manual Lock Out Kit for Demco DA75 Trailer Brake Actuators
- Shop: Demco DA86 Trailer Brake Actuator - Drum - Zinc - 2" Ball - 8,600 lbs
- Shop: Demco DA75 Trailer Brake Actuator for Drum Brakes - Zinc Plated - 2" Ball - 7,500 lbs
- Shop: Demco DA75 Trailer Brake Actuator for Disc Brakes - Zinc Plated - 2" Ball - 7,500 lbs
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Q&A: Solution for Reverse Lockout on Demco DA70 Actuator
- Video: All About the Demco Hydraulic Brake Actuator-DM72VR
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Video: What to Know About the Demco Hydraulic Brake Actuator w/ Electric Lockout
- Q&A: Tie Down Model 70 Surge Brake Actuator Replacement Recommendation
- Q&A: Replacement Bolt-On Disc Brake Actuator for Tie Down 70E
- Q&A: Should the Grease Bolts Be Tight on the Dexter DX7.5 Drop-N-Go Brake Actuator?
- Q&A: Will Dexter DX7.5 Drop-N-Go Brake Actuator Match TDE 660 Bolt Pattern
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Recommended Replacement for Tie Down Engineering (TDE) Brake Actuator 48980
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Trailer Wiring Diagrams
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
on Brake Actuator
