Replacement Internal Sensors for TST TPMS Systems

Question

Question:

I have a TST M/N 507RV system with internal sensors that dates back to 2016. What is the life expectancy for the batteries on those sensors? I need to replace my 4 trailer tires Im assuming that I should replace the sensors at the same time? I could only find complete systems and not just the sensors on your website.

asked by: Stephen N

0

Expert Reply:

In order to replace the TST Internal TPMS Sensors you'll use the Internal Tire Sensor for TST TPMS Systems part # TST-507-INT-S1. The life is listed as 5-7 years.

expert reply by: Conner L

0

Answer 1

Yes, the Brass Tire Sensors for TST TPMS #TST-507-RV-S2 are the correct tire sensors to work with your current TST display with 2119 markings to add 2 more tire sensors.

view full answer...

Answer 2

I can only go by what the owner's manual for your 2014 Chevy Express Van lists and on the online version I was able to pull up it shows the following fuse locations for towing circuits inside the under-hood fuse block: #3 position - Trailer Right…

view full answer...

Answer 3

As you have the Monitor #TST-507-D-C you will simply need the Signal Booster #TST-507-R to go along with some new tire sensors. You do have the option of what sensors you will prefer to use from the list below. Brass Tire Sensors for TST TPMS - Qty 2…

view full answer...

Answer 4

Hey Justin, yes the TST Sensor part #TST47FR does work with your TST 770 monitor that you have and would work great.

view full answer...

Answer 5

The new TST 770 series screens are compatible with the TST 507 tire sensors manufactured with a date code of 4519 and later. You will be able to use the Internal Tire Sensor #TST-507-INT-S1 with your monitor. We also have the Brass Sensors…

view full answer...

Answer 6

Hey Eric, I checked with the manufacturer, TST, and the battery is not replaceable on the Internal Tire Sensor for TST TPMS Systems #TST-507-INT-S1. That said, the battery on these lasts four years so it'll be some time before you'll need to…

view full answer...

Answer 7

I contacted the manufacturer in regards to the life span of the band on the Internal Tire Sensor #TST-507-INT-S1. They informed me that the band is made of stainless steel and if installed properly will outlast the life span of the battery which is…

view full answer...

Answer 8

Since your display is the part #TST-507-D-C the valve stem sensors like the #TST-507-RV-S2 can be used with it. The internal sensors we also offer with part #TST-507-INT-S1.

view full answer...

Answer 9

Yes, you can swap out your cap sensors for internal sensors and they will work with your current TST-507-RV-4 system. We offer the internal sensors individually with part #TST-507-INT-S1. Definitely a good idea if you don't want to have to worry…

view full answer...

Answer 10

Junic, I did some research it looks like the 770 monitor will work with all other TPMS's as long as they have a date code of 4519 (45th week of 2019) or newer. If your sensors are older, then you'd need to use the 507 display; #TST-507-D-C.

view full answer...

Answer 11

According to my contact at TST, going with the internal sensor would have the following benefits: • Battery Life. The internal sensors can be expected to last 5+ years, versus about 1 to 1-1/2 years for the external. • Protection: By virtue of the…

view full answer...

Answer 12

We do have the TST sensors that fit in the wheel with #TST-507-INT-S1 but we do not have just the band clamp.

view full answer...

Replacement Internal Sensors for TST TPMS Systems

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching