Replacement Grease Seal for Hadco LA370R 6 On 5-1/2 Hub
Updated 10/20/2024 | Published 06/02/2021 >
Products Featured in This Question
Question:
I have an old airstream trailer with a 6 on 5 1/2 hub hadco la370r casting 25580/lm67048 bearings and the seal measures 2.25 ID x 3.268 od can you id? Thx
asked by: Tom W
Expert Reply:
We don't offer a grease seal that would have the proper outer diameter to work with your Hadco Hubs, but we might have a solution that would allow you to upgrade your existing hub/drums so they're compatible with easily obtainable grease seals.
If your Airsteam uses a standard 12 inch brake assembly like # 23-106, you can replace your hubs using
# 8-201-5UC3-EZ which uses the readily available 10-10 grease seal. The hub/drum is compatible with the 25580 inner and LM67048 outer bearing and the seal has a 2.25 ID. The hub/drum includes the bearings, races, grease seal, dust cover and lug nuts.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.75 Inch I.D.
- 2.33 Inch O.D.
- Redline
more information >
Continue Researching
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Video: All You Need to Know About the Dexter Nev-R-Adjust Electric Trailer Brakes
- Q&A: 6 Lug Hub Recommendation with Bearings LM67048 and 25580
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Q&A: Replacement Hub Recommendation for a Dexter 8-155 Hub
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Q&A: Replacement Brake Assemblies for Dexter 023-358-00 Trailer Brakes
- Q&A: Replacement Recommendation for Dexter Axle 8-201 Hub Assembly on Older Horse Trailer
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Article: Testing Trailer Brake Magnets for Proper Function
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer wiring
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Dometic Soft Start for Dometic B59516.711C0-MX
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Search Results: trailer tires and wheels
- Video: Hands-On with the Dexter Nev-R-Adjust Electric Trailer Brakes
- Shop: Suspension Enhancement
- Q&A: Does Dexter 12V KTI Hydraulic Pump Come With Oil
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Search Results: trailer hitch
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Search Results: trailer jack
- Shop: Brake Controller


Andy
10/20/2024
Hey Mike. I've got the same hub (HADCO LA370R) as the one Tom W asked about, here in the Q+A. But the bearings I just pulled out are different than than the ones referenced above. I've got LM67048 and 25577. Should this hub actually have 25580, not 25577? I can't find any old HADCO literature or info on the internet. Thanks for your help!