SuperSprings Custom Stabilizer and Sway Kit For a 2004 Chevrolet Silverado 2500HD

Question

Question:

Will this SSA15 fit my 2004 Chevy Silverado 4x4 2500hd or is it the SSA13

asked by: Darrin D

0

Expert Reply:

The SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SSA15MXKT will fit your 2004 Chevrolet Silverado 2500HD. These are designed to assist up to 2,600lbs of weight with trucks that have the leaf springs mounted above the axle. This will not increase your weight capacities they are only assisting your suspension.

You also have the option to use the SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SSA10MXKT. This has a lower weight rating at 1,650lbs capacity.

The SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SSA13MXKT and # SSA16MXKT are for the 2011-current Silverado 2500HD's.

expert reply by: Bud M

0

Answer 1

Hey Fernando, I'd be happy to help you pick out the correct Timbren rear suspension kit for your 2023 Toyota Tacoma TRD that will be towing a trailer. Really it comes down to two options. You would want the part #TTORTUN4L for if you have the 3…

view full answer...

Answer 2

Hi Steve! We do have a Snap & Zap options for your 2022 Toyota Tacoma SL5 with the K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side #KS93NQ. That said, these are still only available for preorder and we…

view full answer...

Answer 3

Yes, the SuperSprings kit part #SSA5 is a pair of springs and it comes with all mounting hardware needed to install it. However this kit does not fit your 2005 Chevy Suburban but we do have a similar setup that does with the Roadactive kit part…

view full answer...

Answer 4

The #SS62KV will not fit your 2018 Jayco Melbourne Prestige 24LT with dual rear wheels. These will fit some models of the Sprinter 3500 since not all motorhomes built on this chassis have the dual rear wheels. You have a Class C with the dual rear…

view full answer...

Answer 5

The best suspension enhancement for a 2023 Mercedes-Benz Sprinter 2500 & 3500 are the SuperSprings Stabilizer, and the part number that fits both the 2500 and 3500 is the following: - SuperSprings Custom Suspension Stabilizer and Sway Control Kit…

view full answer...

Answer 6

Hey Paul, Tongue weight is typically 10-15% of the trailer's GVWR so you would need a jack that could handle 600lb to 900lbs in order to lift the tongue. The Electric Jack w/ Footplate #EJ-3520-BBX you were already looking at has a 3,500lb…

view full answer...

Answer 7

Typically with the weights you mentioned I would go with the SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA22 which is the 2,500 lb. kit. But with your camper being a permanent mount, I would go with the SuperSprings Custom…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...