Spring Pad Location On Dexter 3,500lb Axle # 35545E-ST-89
Updated 05/26/2021 | Published 05/24/2021
Products Featured in This Question
Question:
Are the spring pads welded in the correct position 74inch on Center or shipped loose with the axle?
asked by: Jim C
Expert Reply:
The spring pads are welded onto the underside of the axle at 74" center for the Dexter Trailer Axle w/ Electric Brakes # 35545E-ST-89. The 3,500lb axle has an 89" hub face to hub face measurement and includes 10" brakes with a 5 on 4-1/2" lug pattern.
The Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 will allow for you to mount the axle under the leaf springs as opposed to on top of them if you are looking for more ground clearance or already have the axle mounted below the springs.
A new Spring Seat # TRSS238 can also be welded onto the axle where it is needed if the 74" measurement is not exactly what you are needing.
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Trailer Wiring
- Video: Redarc Tow-Pro Trailer Brake Controller Plug-and-Play Wiring Harness Review
- Search Results: lippert
- Search Results: lippert axles
- Shop: Adapter 4-Pole to 7-Pole and 4-Pole
- Shop: Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Shop: Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers
- Shop: Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob - Up to 2 Axles - Proportional
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic, Elite, or Liberty Trailer Brake Controllers
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Video: A Closer Look at the Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: How to Grease a Dexter EZ Lube Axle
- Q&A: Is Load Capacity of Axle Changed By Installing Under Leaf Springs Versus Over?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Video: How to Choose a Trailer Brake Controller
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer wiring
- Article: Trailer Wiring Diagrams
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: brake controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Axles
