Bolt Hole Dimensions For Mounting Draw-Tite Max-Frame Trailer Hitch Receiver # 75282

Question

Question:

What is the distance between bolt holes from side to side? My girl friend got one from another manufacturer and both were wrong for a 2015 Nissan Frontier sv crew cab. Thank you

asked by: Robert L

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver # 75282 will have the following bolt hole dimensions for your 2015 Nissan Frontier.

The Bolt holes from drivers side to passenger side frame rails are 43-5/8" on center. The holes running from front of the hitch to back are spaced 3-1/2" on center. I have included the picture with measurements for you to reference.

expert reply by: Bud M

0

Bolt Hole Dimensions For Draw-Tite # 75282
(click to enlarge)

Answer 1

I was able to go out to our warehouse and measure the Curt hitch #C13149 for you. From the top of the bracket to the bottom of the receiver opening measured 8-13/16 inches. If you currently have 18 inches from the frame holes of your vehicle, these…

view full answer...

Answer 2

Hello Jeff, thanks for reaching out. I went to our warehouse and measured the etrailer Class 3 Hitch #e98864. The bolt holes are about 42-3/4" apart on center. This hitch is for a 2006-2018 Toyota RAV4. Please let me know if there is anything…

view full answer...

Answer 3

It would depend on which hitch manufacturer you're asking about. Hidden Hitch and Draw-Tite Hitches are manufactured in Mexico by Cequent Performance products. They've been around a long time, they make a quality product and they do an…

view full answer...

Answer 4

Center hole to center hole, the distance apart for all three holes measured from the holes on one flange across to the other is 43-5/8 inches. The flanges measure 41-1/8 apart, measured inside to inside and the 3 holes along each flange are 3-1/2…

view full answer...

Answer 5

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 6

To install a Class III hitch like the Draw Tite part #75282 on your 2013 Nissan Frontier you will use the existing weldnuts that are on the truck frame. The weldnuts are the threaded holes you have already found on the frame. I attached a picture…

view full answer...

Answer 7

We can get your 2022 Nissan Frontier without the factory tow package set up with a 7-way and brake controller, and for the 7-way there is one part that is needed, though it will not be factory style, it will be a 7-way that you plug in and will…

view full answer...

Answer 8

To add a hitch to your 2023 Nissan Frontier you are going to want the Curt Trailer Hitch item #13241. This hitch is custom fit and bolts to your Frontier with included hardware. I really like the Curt hitch because it installs behind your rear bumper…

view full answer...

Answer 9

Correct; the holes will already be there on your 2019 Nissan Frontier when installing any of the trailer hitches that fit this truck. If you take a look at the accompanying photo you can see where these holes are being pointed out by our installer.…

view full answer...

Answer 10

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75282 requires all hardware be torqued to 68 foot pounds according to the instructions. I've attached a photo in case you need anything else for this installation…

view full answer...

Answer 11

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit part #75282 is a great option for your 2019 Nissan Frontier. It is rated for up to 750 lbs of tongue weight and is a nice concealed cross tube design so the only part of the hitch that is…

view full answer...

Answer 12

Sometimes hitches can get slightly bent during shipping and this can be fixed by bending the hitch back into place as long as the hitch only has a slight bend to it. If yours isn't lining up I can almost guarantee that is what happened. Some…

view full answer...

Bolt Hole Dimensions For Mounting Draw-Tite Max-Frame Trailer Hitch Receiver # 75282

Featured Help Information

Miscellaneous Media

Continue Researching