Replacement Hinge For Sears X-Cargo Extreme Box

Question

Question:

i need the right locking bar for a sears cargo extreme

asked by: James R

0

Expert Reply:

It sounds like you might be looking for the Replacement Spring Hinge for SportRack Explorer or SkyLine Cargo Box # SR03810, which we've seen used on Sears X-Cargo boxes. If this isn't the part you're looking for and can provide a photo of the old part you're looking to replace I can see if we have something that will work for you.

expert reply by: Erik B

0

Hinge replacement
(click to enlarge)

Answer 1

We do in fact have the replacement hardware for your Sears X-Cargo carrier. You will need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 which includes everything you need to get your Sears X-Cargo back on the road. No drilling would be…

view full answer...

Answer 2

If you are looking for replacement spring hinges for your Sears X-Cargo box, you will need a Replacement Spring Hinge #SR03810 for your single broken hinge. I went ahead and attached a picture of a Sears X-Cargo Box that has both hinges replaced with…

view full answer...

Answer 3

Some of our replacement parts for SportRack or Thule cargo boxes will fit with some Karrite boxes but we never actually carried the Karrite boxes so I'd need to see a picture of the hinge you are talking about to see if we have anything that…

view full answer...

Answer 4

Just the white cap, no, but we do have the Replacement Spring Hinge for SportRack Explorer or SkyLine Cargo Box #SR03810 which is a complete replacement hinge.

view full answer...

Answer 5

Yes, the Replacement Spring Hinge #SR03810 is going to be the correct spring hinge for your grey and white Sears X-Cargo carrier. Using the picture you included I was able to verify that this was the correct part. I have included a review and picture…

view full answer...

Answer 6

Thank you for the photo of the hinge you need to replace on your Sears X-Cargo Box. The replacement hinge you need is part #SR03810. This item is ordered individually so I recommend you check the other side to make sure it doesn't need to also be…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement Hinge For Sears X-Cargo Extreme Box

Continue Researching