Anti-Rattle/Vibration Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes

Question

Question:

Does the Hollywood RV bike carrier come with the anti vibration lock included or is it purchased separately? I have one of these bike carriers on order with etrailer.

asked by: Daniel R

0

Expert Reply:

Yes, the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes, # HLY64FR, has an anti-rattle hitch pin and hitch tightener to reduce movement of rack in hitch receiver.

expert reply by: Michael R

0

Anti-Vibration
(click to enlarge)

Answer 1

We noticed when we installed the etrailer Trailer Hitch Receiver #e98856 on a similar 2022 Jeep Wrangler it had 8" from the center of the hitch pin to the rear edge of the stock spare tire. This would likely not allow you to fold up the…

view full answer...

Answer 2

Trailer suspensions are a bit less sophisticated and can put more strain on rack and wear it down, which is why manufacturers test their racks with each style of vehicle/RV to see how well they hold up. With the Hollywood Racks RV Rider Bike Rack for…

view full answer...

Answer 3

In order to use the Hollywood Racks Sport Rider SE #HLY84FR with your Lectric Step Thru Bikes, you likely will need to use an adapter bar #HRBA-PRO. This way the hooks will have something to connect to. Otherwise the hooks would not go low enough to…

view full answer...

Answer 4

The Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes #HLY64FR is rated for for motorhome towing and flat towing so you could place it in your dual hitch receiver or on the back of your vehicle if it has a 2" receiver.

view full answer...

Answer 5

Multiple hitch adapters like your #RM-077-10 and #BX88265 can not be used together. You'd be adding one more breaking point into the mix there and running the risk of something happening and the vehicle being loose on the road. The Thule EasyFold…

view full answer...

Answer 6

The Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes part #HLY64FR will work with bikes that have wheels as small as 20" therefore you will be fine. This is the smallest size that is compatible without needing an adapter.

view full answer...

Answer 7

The Hollywood Racks RV Rider #HLY64FR is an excellent option for transporting your 2 M2S All Terrain Scout E-Bikes! It was designed to be used with a motorhome, has a weight capacity of 70 lbs per bike, and uses a clamping arm that can be moved…

view full answer...

Answer 8

The wheelbase won't be a problem for the Inno Tire Hold HD Bike Rack #IN25RR but the fenders will be. If you don't have fenders on your Lectric 3.0 then you can definitely use this bike rack. However, I have only seen it with fenders so…

view full answer...

Answer 9

I have a frame mounted hitch solution for you, however, there is not a front mounted trailer hitch receiver compatible with the 2013 Sprinter chassis. If you are willing to put it on the back of your motorhome I recommend the Curt Adjustable Width…

view full answer...

Answer 10

The Swagman Bike Cover for RVs - Large - 2 Bikes #S24FR would be a fine choice to protect your e-bike on the Hollywood Racks #HLY64FR bike rack, assuming it's less than 70 inches in length and 52 inches in height. This bag is designed for 2…

view full answer...

Answer 11

Hey David, thanks for reaching out. Hollywood actually makes a light kit specifically for the RV Rider Bike Rack, the Hollywood Racks Safety LED Light Bar for Bike Racks #HLY54RR. This uses straps that attach it directly to the crossmember of the…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Anti-Rattle/Vibration Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching