part # KS60195-96

Question

Question:

Is the passenger side concaved for a wider field of view?

asked by: Andrew M

0

Expert Reply:

For the K-Source # KS60195-96C mirrors, the outside spotter mirror segment has a convex lens for an expanded field of view. It is also adjustable independant of the main mirror.

I have included a couple videos on this product as well.

expert reply by: Les D

0

Answer 1

In regards to full replacement towing mirrors, you can't upgrade to gain features. Therefore, the ones you need to use on your 2018 Ram 2500 are the K-Source Custom Flip Out Towing Mirrors part #KS60195-96C. These have power adjustment and heat…

view full answer...

Answer 2

Even though you don't have the turn signals and puddle lamps, you will still be able to use the K-Source Custom Flip Out Towing Mirrors - Electric/Heat w Signal, Lamp - Textured Black - Pair #KS60195-96C. Since you have the power and heat…

view full answer...

Answer 3

The K-Source Custom Flip Out Towing Mirrors - Electric/Heat w Signal, Lamp - Textured Black #KS60195-96C you were looking at does include the ambient air temperature sensor in the driver side mirror and are confirmed to fit your 2020 Ram 1500…

view full answer...

Answer 4

The best replacement towing mirrors we have for your 2017 Ram 3500 are the K-Source Custom Flip Out Towing Mirrors part #KS60195-96C. These mirrors are a direct bolt-on/plug and play fit for your vehicle. The power adjustment feature will be retained…

view full answer...

Answer 5

Though we do not have towing mirrors that will include power folding we do have The K-Source Custom Flip Out Towing Mirrors - Electric/Heat w Signal, Lamp - Textured Black - Pair #KS60195-96C. These custom, power towing mirrors replace the factory…

view full answer...

Answer 6

The K-Source tow mirrors part #KS60195-96C are a confirmed fit for your 2016 RAM 2500 6.7 Cummins Diesel Big Horn as they fit all models of the 2016 Ram 3500. The functions your current mirrors have now will carry over to these mirrors while the ones…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

part # KS60195-96

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching