Which Replacement Hubs for 2000 Ranger Boat Trailer
Updated 06/05/2020 | Published 06/03/2020
Products Featured in This Question
Question:
I have a 2000 Ranger Trailer and Im looking for a spare hub kit.
asked by: JW
Expert Reply:
In order to determine which hubs to use on your 2000 Ranger Boat trailer, you will need to first remove the hub assemblies and check the bearing numbers, which should be stamped onto the backs of the bearings themselves. If you are unable to locate or read the numbers, you can also take a few measurements along the trailer spindle where the bearings and seal sit. I have attached an image that clarifies exactly where these measurements will be taken and the particular bearing each location will reference. I recommend using a digital caliper like # PTW80157.
If you find that your inner and outer bearings are the same # L44649 bearing-which has a 1.063" inner diameter- and your bolt pattern is 5 on 4-1/2, you can use the Dexter Trailer Hubs # 8-258-5UC1. If you find that you've got something different, please let me know what bearings or measurements of the spindles are and I can help you locate the correct replacement parts.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Video: DeeMaxx Hub and Rotor Assemblies Brand Spotlight
- Search Results: grease cap
- Search Results: deemaxx trailer hubs and drums
- Search Results: trailer hubs and drums
- Shop: DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Search Results: trailer bearings races seals caps
- Video: All You Need to Know About the DeeMaxx 10" Hub/Rotor Assembly
- Q&A: Correct Replacement Bearing Kit for Tandem Axle Ranger Boat Trailer
- Q&A: 2005 Ranger Trail Boat Trailer Replacement Hub Bearings and Races for Oil Bath
- Q&A: Replacement 10" Hub and Rotor Assembly With Bearings for 2015 Ranger Boat Trailer
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Shop: Kodiak Disc Brake Assembly - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Video: Let’s Check Out the Grease Seal
- Video: Shackle Strap Review
- Video: Shackle Strap: The Breakdown
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Search Results: bearing buddy caps
- Q&A: How To Find Correct Replacement Hubs for 2015 Ranger Boat Trailer
- Q&A: Grease Seal Recommendation to Replace AD2527E
- Q&A: When Using Bearing Buddy Bearing Protectors Do I Need To Repack Bearings Periodically?
- Q&A: Replacement Oil Seal for 2000 Ranger Bass Boat Trailer Model R8L
- Search Results: 14x6 wheel
- Video: Aluminum Sendel Series T02 Machined Trailer Wheel Review
- Search Results: trailer hitch
- Shop: Trailer Hitch
on Trailer Hubs and Drums
