Finding a Replacement Spindle For a 2005 Ranger Single Axle Boat Trailer

Question

Question:

please advise what information you would require to recommend a tapered spindal 13/8 by 11/16 bearings for the noted boat.

asked by: Chris B

0

Expert Reply:

It really comes down to the weight capacity for your axle on your 2005 Ranger boat trailer. As we do not carry any spindles which have a 1-3/8" inner bearing and 11/16" outer bearing. Here are the more common size spindles used today on axles.

#42 E-Z Lube Spindle # TRU37FR for 5,200lb -7,000lb axles
#84 E-Z Lube Spindle # TRU74FR for 3,500lb axles
BTR Spindle # TRU94FR for 2,000lb axles

Once you know the correct spindle size to match the weight capacity of your axle we will be able to determine the correct hub and brakes if they are required.

expert reply by: Bud M

0

Answer 1

According to my research, your trailer will have a 3500 lb axle on it. The replacement for your TDE 11033 hubs should be #AKIHUB-545-35-G-EZ-K, which use an L68149 inner and an L44649 outer wheel bearing along with a 58846 grease seal that has a…

view full answer...

Answer 2

The Bearing Kit #BK2-100 will contain the new bearings, races, grease seal, tang washer and cotter pin for replacing the bearings on your 2005 Ranger Trail Boat Trailer. The Inner Bearing #L68149, Inner Race #L68111, Outer Bearing #L44649 and Outer…

view full answer...

Answer 3

Hey Mike, thanks for reaching out! I'm pretty sure your boat trailer has a 3,500 lbs axle which means you should need the Grease Seal #TMK58ZR which has a 1.719" ID and a 2.565" OD - you'll want to verify this on your end. I…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Finding a Replacement Spindle For a 2005 Ranger Single Axle Boat Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching